16Eyt-C (Transistor Output); Product Specifications; Fx 2N -8Eyt, Fx 2N -16Eyt, Fx 2N -16Eyt-C (Transistor Output) - Mitsubishi FX3G SERIES User Manual

FX Series Programmable Controllers
3G
User's Manual - Hardware Edition
16.11 FX -8EYT, FX
2N

16.11.1 Product specifications

The generic specifications are identical to the main unit specifications.
For external wiring, refer to the following chapters.
1. Power supply specifications
Item
Product type
Rated voltage
2. Weight and Other specifications (External dimensions are described later.)
Item
MASS (Weight)
Other
3. Output specifications (Transistor output type)
Item
Output Points
Connection type
Output unit/type
External power supply
Output circuit insulation
Indication of output operation
Max. load
Open circuit leakage current
Min. load
Response time
Output circuit configuration
240
-16EYT, FX
2N
FX -8EYT
2N
24V DC (supplied from main unit and input/output powered extension unit)
FX -8EYT
2N
0.2kg (0.44lbs)
• The extension cable is already connected to the extension block.
• Accessories: Label for indication of input/output number
• The DIN46277 rail (width: 35 mm (1.38")) or direct installation.
FX -8EYT
2N
8 points
Vertical terminal block (M3 screws)
The total load current per common should be
Resistance load as follows:
• 4 output points/common: 0.8A or less
• 8 output points/common: 1.6A or less
Inductive load
OFF ON
ON OFF
Load
Fuse
DC power
supply unit
Fuse
DC power
supply unit
16.11 FX2N-8EYT, FX2N-16EYT, FX2N-16EYT-C (Transistor Output)

-16EYT-C (Transistor Output)

2N
→ Refer to Section 4.1 for generic specifications.
→ Refer to Chapter 12 for output wiring.
FX -16EYT
2N
FX extension block
2N
FX -16EYT
2N
FX -16EYT
2N
Transistor/sink output
5 to 30V DC
Photo-coupler insulation
Activation of the photo-coupler will light the LED indicator lamp on panel.
0.5A/point
12W/24V DC
0.1mA/30V DC
0.2ms or less for 200mA (at 24V DC)
0.2ms or less for 200mA (at 24V DC)
Y
COM1
Y
COM2
16 Input/Output Extension Blocks
FX -16EYT-C
2N
FX connector type extension block
2N
FX -16EYT-C
2N
0.3kg (0.66lbs)
FX -16EYT-C
2N
16 points
Connector terminal block
0.3A/point
The total load current per common should be
as follows:
• 16 output points/common: 1.6A or less
7.2 W/24V DC
-
Load
Y
Fuse
COM
DC power
supply unit
Y
Fuse
COM
DC power
supply unit