Specified Device Monitor Function; System Information - Specified Device Monitor Function - Mitsubishi FX3G SERIES User Manual

FX Series Programmable Controllers
3G
User's Manual - Hardware Edition

19.14 Specified Device Monitor Function

The specified device monitor function can change the top screen to the monitor/test screen for a device
specified by the user.
For the specified device monitor function, specify the device type to be displayed in "D
information (system signal 1), and specify the device number to be displayed in "D
information (system signal 1).
It is necessary to turn ON M

19.14.1 System information - specified device monitor function

1. System signal 1
System Information
D
D +1
*1. Maximum or minimum value of the corresponding device if the device number is set outside the
allowable range
The table below shows the device type to be displayed in accordance with the numeric value written in
D .
If any numeric value outside the range from 1 to 10 is written in D
function is disabled.
Value stored in D
1
2
3
4
5
6
7
8
9
10
others
2. System signal 2
System Information
M
M +1
M +4
M +5
M +6
M +7
M +9
*1. Turns ON after completion of a test operation for a specified device monitor (or when the OK or ESC
key operated).
To turn OFF, the request edit of a specified device monitor is turned off or it is turned off in the user's
program.
296
to enable the test operation on the specified device monitor screen.
Description
Device type to be displayed
*1
Device No. to be displayed
Device type
Input(X)
Output(X)
Auxiliary relay(M)
State(S)
Timer(T)
Counter(C)
Data register(D)
Data register(DD)
Extended register(R)
Extended register(DR)
Not used
Request Edit of displayed device data
ON : Enables the test function.
OFF : Disables the test function (and enables only monitoring).
*1
Edition completion response
"ESC" key status
"-" key status
"+" key status
"OK" key status
Specified device monitor display status
ON : The specified device monitor screen is displayed.
OFF : Any screen other than the specified device monitor screen is displayed.
19.14 Specified Device Monitor Function
Description
19 Display Module(FX3G-5DM)
" of the system
+1" of the system
, the specified device monitor