Part Names; Fx 3G; User's Manual - Hardware Edition - Mitsubishi FX3G SERIES User Manual

FX Series Programmable Controllers
3G

User's Manual - Hardware Edition

15.2.2 Part names

1. Front
[1] Top cover
[2] DIN rail mounting hooks
[1] Top cover
[2] DIN rail mounting hooks
(2 places)
[3] Model name
[4] Input display LEDs (red)
[5] Terminal block covers
[6] Extension device connecting
connector cover
[7] POWER LED (green)
[8] Output display LEDs (red)
192
[3] Model name
When adding this to the main unit, connect the supplied extension cable or the optional
extension cable to the connector under this top cover.
The input/output powered extension unit can be installed on DIN rail
(35mm (1.38") wide).
The model name of the input/output powered extension unit is indicated.
When an input terminal (X0, X1, etc.) is turned on, the corresponding LED lamps are also
turned on.
The input numbers change depending on input/output allocation.
The input/output powered extension unit (48 points type) assigns input
numbers in ascending order from A B C below.
A
0 1 2 3 4 5
B
0 1 2 3 4 5
The covers can be opened about 90 for wiring.
Keep the covers closed while the PLC is running (the unit power is on).
Connect the extension cable of input/output powered extension unit/block or special
function unit/block to the extension device connecting connector under this cover.
FX Series extension devices, FX
3U
be connected.
→ For details on extension devices, refer to Chapter 15, Chapter 16 and
The LED lamp is on (green) while the power supply terminal is on.
When an output terminal (Y0, Y1, etc.) is turned on, the corresponding LED lamps are also
turned on. The output numbers change depending on input/output allocation.
The input/output powered extension unit (48 points type) assigns output
numbers in ascending order from A B C below.
A
0 1 2 3 4 5
B
0 1 2 3 4 5
15 Input/Output Powered Extension Units
15.2 Power supply specifications
[4] Input display LEDs
[5] Terminal block covers
[6] Extension device connecting
connector cover
[7] POWER LED
[8] Output display LEDs
6 7 0 1 2 3 4
6 7
Series extension devices, are compatible and can
2N
6 7 0 1 2 3 4
6 7
C
5 6 7
Section 18.1.
C
5 6 7