SNMP
Simple Network Management Protocol (SNMP) is a set of network protocols designed to allow you to
manage and monitor devices on your network.
Enabling SNMP
1.
At your computer, open a Web browser, in the address field, type the IP address of the printer, then
press Enter or Return.
Note:
If you do not know the IP address of your printer, see
page 12.
Click Properties > Protocols > SNMP.
2.
3.
Select Enable SNMP.
Select Enable SNMPv1/v2c Protocols or Enable SNMPv3 Protocol.
4.
5.
To edit the SNMP properties, click Edit SNMPv1/v2c Properties or Edit SNMPv3 Properties.
6.
Click Save Changes.
Configuring SNMPv1/v2c
SNMP is a network management protocol. SNMP version 1 (SNMPv1) is the first implementation of the
SNMP protocol. It operates over protocols including UDP, IP, and IPX.
SNMP version 2 (SNMPv2c) includes improvements in performance, confidentiality, and
manager-to-manager communications over SNMPv1, however it uses the simple-community based
security scheme of SNMPv1.
1.
At your computer, open a Web browser, in the address field, type the IP address of the printer, then
press Enter or Return.
Note:
If you do not know the IP address of your printer, see
page 12.
Click Properties > Protocols > SNMP > Edit SNMPv1/v2c Properties.
2.
3.
For GET Community Name, type a name.
4.
To allow a host with this community name to perform SNMP SETS on the printer, for SET
Community Name, type a name.
5.
To allow a host with this community name to receive traps from printer, for Trap Community Name,
type a name.
6.
For up to four configurations, do the following:
a.
For Trap Address Type, select an option.
®
®
Xerox
WorkCentre
3615 Black and White Multifunction Printer
Network Connectivity
Finding the IP Address of Your Printer
Finding the IP Address of Your Printer
System Administrator Guide
on
on
49