Hs (Hardware Series); Ck (Configuration Crc); Diagnostic Interface Commands; Di (Device Cloud Indicator) - Digi XBee Cellular LTE Cat 1 User Manual

AT commands
Parameter range
0 - 0xFFFF [read-only]
Default
Set in the factory

HS (Hardware Series)

Read the device's hardware series number.
Parameter range
N/A
Default
Set in the factory

CK (Configuration CRC)

Displays the cyclic redundancy check (CRC) of the current AT command configuration settings.
Parameter range
0 - 0xFFFFFFFF
Default
N/A

Diagnostic interface commands

The following AT commands are diagnostic interface commands.

DI (Device Cloud Indicator)

Displays the current Device Cloud status for the XBee.
Range
Value Description
0x00
Connected
0x01
Before connection to the Internet
0x02
Device Cloud connection in progress
0x03
Disconnecting from Device Cloud
0x04
Not configured for Device Cloud
Default
N/A
Digi XBee Cellular LTE Cat 1 Embedded Modem User Guide

Diagnostic interface commands

64