Interface And Hardware Specifications; Rf Characteristics; Networking And Carrier; Power Requirements - Digi XBee Cellular LTE Cat 1 User Manual

Technical specifications

Interface and hardware specifications

The following table provides the interface and hardware specifications for the device.
Specification
Dimensions
Weight
Operating temperature
Antenna connector
Digital I/O
ADC

RF characteristics

The following table provides the RF characteristics for the device.
Specification
Modulation
Transmit power
Receive sensitivity
Over-the-air maximum data rate
Data throughput

Networking and carrier

The following table provides the networking and carrier specifications for the device.
Specification
Addressing options
Carrier and technology
Supported bands
Security

Power requirements

The following table provides the power requirements for the device.
Digi XBee Cellular LTE Cat 1 Embedded Modem User Guide
Value
2.438 x 3.294 cm (0.960 x 1.297 in)
5 g (0.18 oz)
-40 to +80 °C
U.FL for primary and secondary antennas
13 I/O lines
4 10-bit analog inputs
Value
LTE/4G – QPSK, 16 QAM
23 dBm
-102 dBm
10 Mb/s
TBD
Value
TCP/IP and SMS
Verizon 4G LTE Cat 1
4 and 13
SSL/TLS
Interface and hardware specifications
28