Serial Interfacing Commands; Bd (Baud Rate); Nb (Parity) - Digi XBee Cellular LTE Cat 1 User Manual

AT commands
Parameter range
-
Default
0.0.0.0

Serial interfacing commands

The following AT commands are serial interfacing commands.

BD (Baud Rate)

Sets or reads the serial interface baud rate for communication between the device's serial port and
the host.
Parameter range
0x0 - 0xA (standard rates) 0x5B9 to 0x5B8D80 (non-standard rates up to 6 Mb/s)
Parameter
0x0
0x1
0x2
0x3
0x4
0x5
0x6
0x7
0x8
0x9
0xA
Default
3 (9600 b/s)

NB (Parity)

Set or read the serial parity settings for UART communications.
Parameter range
0x00 - 0x02
Digi XBee Cellular LTE Cat 1 Embedded Modem User Guide

Serial interfacing commands

Description
1200 b/s
2400 b/s
4800 b/s
9600 b/s
19200 b/s
38400 b/s
57600 b/s
115200 b/s
230400 b/s
460800 b/s
921600 b/s
57