Configure The Xbee Cellular Modem Using Device Cloud; Create A Device Cloud Account; Get The Xbee Cellular Modem Imei Number; Add A Digi Xbee To Device Cloud - Digi XBee Cellular LTE Cat 1 User Manual

Getting started with the XBee Cellular Modem Development
Kit
Host: httpbin.org
13. Click the HEX input tab and add 0A (zero A) after each 0D (zero D), and add an additional 0D 0A
at the end of the message body. For example, copy and past the following text into the HEX
input tab:
47 45 54 20 2F 69 70 20 48 54 54 50 2F 31 2E 31 0D 0A 48 6F 73 74 3A 20 68 74 74 70 62 69 6E
2E 6F 72 67 0D 0A 0D 0A
Note The HTTP protocol requires an empty line (a line with nothing preceding the CRLF) to terminate
the request.
14. Click Add packet.
15. Click the Open button
16. Click Send selected packet.
17. A GET HTTP response from httpbin.org appears in the Console log.

Configure the XBee Cellular Modem using Device Cloud

Create a Device Cloud account

Digi Device Cloud is an on-demand service with no infrastructure requirements. Remote devices and
enterprise business applications connect to Device Cloud through standards-based web services. This
section describes how to configure and manage an XBee using Device Cloud. For detailed information
on using Device Cloud, refer to the Device Cloud User Guide, available via the Documentation tab in
Device Cloud.
Before you can manage an XBee with Device Cloud, you must create a Device Cloud account. To create
a Device Cloud account:
1. Go to www.digi.com/cloud/digi-device-cloud.
2. Click Free Developer Account.
3. Follow the online instructions to complete account registration. You can upgrade your
Developer account to a paid account at any time.
When you are ready to deploy multiple XBee Cellular Modems in the field, upgrade your account to
access additional Device Cloud features.

Get the XBee Cellular Modem IMEI number

Before adding an XBee to your Device Cloud account inventory, you need to determine the
International Mobile Equipment Identity (IMEI) number for the device. Use XCTU to view the IMEI
number by querying the IM parameter.

Add a Digi XBee to Device Cloud

To add an XBee to your Device Cloud account inventory, follow these steps:
Go to devicecloud.digi.com.
1. Log in to your account
2. Click Device Management > Devices.
Digi XBee Cellular LTE Cat 1 Embedded Modem User Guide
Configure the XBee Cellular Modem using Device
.
Cloud
25