Receive (Rx) Packet: Ipv4 - 0Xb0 - Digi XBee Cellular LTE Cat 1 User Manual

Operate in API mode

Receive (RX) Packet: IPv4 - 0xB0

Description
The XBee Cellular Modem uses this frame when it receives RF data on the port defined by the
(Source Port) command.
Format
The following table provides the contents of the frame. For details on frame structure, see
specifications.
Field
Field name value
Frame type 0xB0
Source
address
Destination
port
Source port
Protocol
Status
Payload
Digi XBee Cellular LTE Cat 1 Embedded Modem User Guide
Data type Description
Byte
32-bit big
endian
16-bit big
endian
16-bit big
endian
Byte 0 = UDP
1 = TCP
4 = SSL over TCP
Byte Reserved
Variable Data received from the source. The maximum size is
1500 bytes.
Frame descriptions
C0
API frame
81