Execution Commands - Digi XBee Cellular LTE Cat 1 User Manual

AT commands
Parameter
0x10
0x11
0x12
0x20
0x21
0x22
0x23
0x24
0x25
0x26
0x27
0x28
0xFF
The following table provides the parameter's meaning when IP = 2 for SMS connections.
Parameter
0x00
0x01
0x02
0x03
0x10
0x11
0xFF
Parameter range
0 - 0xFF (read-only)
Default
-

Execution commands

The location where most AT commands set or query register values, execution commands execute an
action on the device. Execution commands are executed immediately and do not require changes to
be applied.
Digi XBee Cellular LTE Cat 1 Embedded Modem User Guide
Description
Not registered to the cell network.
Cellular component not identified yet.
DNS query lookup failure.
Bad handle.
User closed.
No network registration.
No internet connection.
No server - timed out on connection .
Unknown server - DNS lookup failed .
Connection refused.
Connection lost.
Unknown.
No known status.
Description
SMS successfully sent.
SMS failed to send.
Invalid SMS parameters - check
SMS not supported.
No network registration.
Cellular component stack error.
No SMS state to report (no SMS messages have been sent).
P# (Destination Phone Number).

Execution commands

66