Sb (Stop Bits); Ro (Packetization Timeout); Ft (Flow Control Threshold) - Digi XBee Cellular LTE Cat 1 User Manual

AT commands
Parameter
0x00
0x01
0x02
Default
0x00

SB (Stop Bits)

Sets or reads the number of stop bits for UART communications.
Parameter range
0x00 - 0x01
Parameter
0x00
0x01
Default
0x00

RO (Packetization Timeout)

Set or read the number of character times of inter-character silence required before transmission
begins when operating in Transparent mode.
Set RO to 0 to transmit characters as they arrive instead of buffering them into one RF packet.
Set to FF for realtime typing by humans. Also, see
Parameter range
0 - 0xFF (x character times)
Default
3

FT (Flow Control Threshold)

Set or display the flow control threshold.
De-assert CTS when FT bytes are in the UART receive buffer.
Parameter range
0x9D - 0x82D
Default
0x681
Digi XBee Cellular LTE Cat 1 Embedded Modem User Guide
Description
No parity
Even parity
Odd parity
Configuration
One stop bit
Two stop bits
TD (Text
Serial interfacing commands
Delimiter).
58