At Command: Queue Parameter Value - 0X09 - Digi XBee Cellular LTE Cat 1 User Manual

Operate in API mode

AT Command: Queue Parameter Value - 0x09

Description
This frame allows you to query or set device parameters. In contrast to
frame queues new parameter values and does not apply them until you issue either:
The AT Command (0x08) frame
n
The AC command
n
When querying parameter values, the 0x09 frame behaves identically to the 0x08 frame. The device
returns register queries immediately and not does not queue them. The response for this command is
also an AT Command Response frame (0x88).
Format
The following table provides the contents of the frame. For details on frame structure, see
specifications.
Field Field
name value
Frame 0x09
type
Frame ID
AT
command
Parameter
value
Digi XBee Cellular LTE Cat 1 Embedded Modem User Guide
Data
type Description
Byte
Byte Identifies the data frame for the host to correlate with a subsequent
ACK. If set to 0, the device does not send a response.
Byte Command name: two ASCII characters that identify the AT command.
Byte If present, indicates the requested parameter value to set the given
register. If no characters are present, it queries the register.
Frame descriptions
AT Command - 0x08, this
API frame
74