Selecting Magnification Ratio (Lens Mode); To Copy In 1.000 Magnification Mode - Minolta CF5001 User Manual

Selecting Magnification Ratio (Lens Mode)

When the copier is turned ON, the magnification ratio is set to 1.000 (100%) automatically
on the Basic Screen.
Follow each procedure described in this section to select the desired magnification ratio.

To Copy in 1.000 Magnification Mode

Follow this procedure to make a 100% copy of the original image.
1.
Close the RADF securely, then press [AUTO RESET].
The initial settings are restored. Check that APS is highlighted to indicate that the 1.000
magnification is selected.
2.
Select additional copy conditions, as desired.
3.
Enter the desired print quantity from the control panel keypad.
4.
Position original(s).
5.
Press [START].
3-22
The initial settings may be altered by the Key Operator. See p. 14-10.
Specifying copy size will release 1.000 magnification and set AMS
automatically. In this case, touch 1:1 to highlight it again.
See p. 3-10 for details on setting print quantity.
See p. 3-4 to p. 3-9 for details on positioning originals.