Weekly Timer - Minolta CF5001 User Manual

Features of the CF5001 (continued)
Rotation
Rotates the image before copying when the portrait/landscape orientation of the original is
different from the orientation of the copy paper.
Rotation Exit (Rotation Sort / Rotation Group)
When no Finisher is installed, Rotation Exit alternately switches the horizontal and vertical
orientation of each sorted set as it outputs to the exit tray. Be sure to load both 8.5"x11"
and 8.5"x11"R in separate trays (including the Multi-sheet bypass tray) before selecting
this feature.
Sheet/Cover Insertion
Insert up to 30 blank or copied sheets from any tray including the Multi-sheet bypass tray,
or inserts blank or copied front and back covers from any tray including the Multi-sheet
bypass tray to enhance the presentation of multi-page documents.
Stamp
Prints watermark, regular stamp, date/time, page number, and numbering onto the output
copies to enhance the presentation and usefulness of the copies.
Staple
Selects the stapling position and number of staples.
STD Size (Special)
Detects the standard paper sizes which cannot normally be detected when loaded in a
main body tray or Multi-sheet bypass tray.
Tab Paper
Copies onto tabbed sheets from tabbed originals, allowing the image on the tab part of the
original to be printed on the same part of the tabbed copy paper.
Three-Fold Mode for Machine with FN-9 Finisher Installed:
Folds 8.5"x11"R or A4 output copies in three.
Trimming Mode for FN-9 Finisher with TMG-3 Trimming Unit Installed:
Trim the end of folded or stapled & folded booklets.

Weekly Timer

Can be set according to the needs of each work environment. Turns main body power Off/
On daily or weekly, during lunch time, on holidays, and also enables the Timer Interrupt
mode, which allows temporary use of the machine even when the machine is in the daily,
weekly, or holiday Off mode.
Wide Paper
Copies onto paper slightly larger than the specified regular size.
Z-Folded Original
This feature sets the RADF to accept Z-folded originals.
xiii