Minolta EP2030 Operator's Manual

Minolta EP2030 Operator's Manual

Hide thumbs Also See for EP2030:
Table of Contents

Advertisement

Table of Contents

Using the Copier Properly .............................................................. X-1
What is an Energy Star Copier?..................................................... X-3
EP2030 .......................................................................................... X-4
CE Marking (Declaration of Conformity) ........................................ X-4
Feeding Direction (copy paper path).............................................. X-5
Terms and Symbols Used.............................................................. X-6
1
1.1
Installing the Copier......................................................................1-1
Installation Site................................................................................1-1
Power Source..................................................................................1-1
Space Requirements.......................................................................1-2
1.2
Precautions for Use ......................................................................1-3
Operating Environment ...................................................................1-3
Using the Copier Properly ...............................................................1-3
Moving the Copier ...........................................................................1-4
Care of Copier Supplies ..................................................................1-4
Legal Restrictions on Copying ........................................................1-4
Financial Instruments ......................................................................1-4
Legal Documents ............................................................................1-4
General ...........................................................................................1-5
2
2.1
Übersicht........................................................................................2-1
EP2030 ...........................................................................................2-2
Papiermagazinunterschrank PF-206 <Zubehör> ............................2-2
Papiermagazinunterschrank PF-112 <Zubehör> ............................2-2
2.2
Bezeichnung der Bauteile ............................................................2-3
Außen am Kopierer .........................................................................2-3
EP2030

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EP2030 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Minolta EP2030

  • Page 1: Table Of Contents

    Table of Contents Using the Copier Properly .............. X-1 What is an Energy Star Copier?............. X-3 EP2030 ..................X-4 CE Marking (Declaration of Conformity) ........X-4 Terms and Symbols for the Type of Originals and Copy Paper..X-5 Feeding Direction (copy paper path)..........X-5 “Width”...
  • Page 2 Manual Bypass Copying ............3-13 Copy Paper That Can be Used for Manual Bypass...... 3-13 Using the Multi Bypass Tray............3-14 Copy Paper Size ................. 3-16 Auto Paper Mode................3-16 Manual Selection ................3-17 Auto Drawer Switching ..............3-17 EP2030...
  • Page 3 3-34 File Margin Mode.................3-35 Loading the Originals ..............3-36 Setting the File Margin Mode ............3-36 3.10 Cover Mode..................3-37 Using the Cover Mode ..............3-38 Using the User Mode Meter Count ...................4-1 Total ....................4-1 Size ....................4-1 2-Sided Total...................4-1 2-Sided Size..................4-1 Counter Display................4-1 EP2030...
  • Page 4 When the Misfeed Indicator Lights Up ........5-15 Misfeed Indicator and Monitor Display ......... 5-15 Misfeed Clearing Procedures ............5-16 Copier (Fusing/Transport Section) ..........5-16 Copier (Paper Take-Up Section) ..........5-18 Copier (Multi Bypass Section) ............5-19 Paper Feed Cabinet (PF-206) ............5-21 EP2030...
  • Page 5 Troubleshooting When This Type of Copy is Produced.........6-1 The Copier is not functioning as designed ........6-3 Miscellaneous Specifications................7-1 Copier EP2030................7-1 Duplexing Document Feeder AFR-12 ..........7-2 Automatic Document Feeder AF-5..........7-3 Sorter S-106..................7-4 Staple Sorter ST-104 ..............7-5 Paper Feed Cabinet PF-206 ............7-5 Paper Feed Cabinet PF-112 ............7-6...
  • Page 6 Paper Size ..................7-12 Zoom Ratio Table (Original Size to Copy Paper Size) ....7-13 Index EP2030...
  • Page 7: Using The Copier Properly

    A damaged cord could result in a fire or cause an electrical shock. Never unplug the power cord with a wet hand, as it could cause an electrical shock. Always unplug the power cord when the copier is not going to be used for a long time. EP2030...
  • Page 8 Pour avoir la certitude de travailler dans un environnment réunissant des conditions de confort, santé et de sécurité, il est préférable de bien aérer la pièce ou se trouve le copieur EP2030...
  • Page 9: What Is An Energy Star Copier

    It takes 10 times more energy to produce a piece of paper than it does to make a single copy on a copier. Therefore, using less paper also means decreased national energy consumption. EP2030...
  • Page 10: Ce Marking (Declaration Of Conformity

    EP2030 Thank you for choosing Minolta. This operator’s manual explains how to operate the copier and replenish its supplies. It also gives some troubleshooting tips as well as general precautions to be observed when operating the copier. To ensure the best performance and effective use of your copier, read this manual carefully until you familiarize yourself thoroughly with its operation and features.
  • Page 11: Terms And Symbols For The Type Of Originals And Copy Paper

    “feeding direction.” “Width” and “Length” When we talk about the size of the original or copy, we call side A “width” and side B “length.” A: width B: Length EP2030...
  • Page 12: Terms And Symbols Used

    “width,” we call it “lengthwise” and use symbol “L” or “ ”. <Crosswise > When the original or copy has a “length” shorter than its “width,” we call it “crosswise” and use symbol “C” or “ ”. EP2030...
  • Page 13: Safety Notes

    A place which is not near any kind of heating device. Power Source The power source voltage requirements are as follows. Use a power source with little voltage fluctuation. Voltage Fluctuation: Within ±10% Frequency Fluctuation: Within ±0.3% EP2030...
  • Page 14: Space Requirements

    NOTE è Be sure to allow a clearance of 150 mm or more at the back of the copier as there is a ventilation duct. 1,123 1,632 1,359 1,055 1.632 Scale: mm EP2030...
  • Page 15: Precautions For Use

    Pour avoir la certitude de travailler dans un environnement réunissant des conditions de confort, santé et de sécurité, il est préférable de bien aérer la pièce ou se trouve le copieur. EP2030...
  • Page 16: Moving The Copier

    Bonds or other Certificates of Indebtedness Stock Certificates Legal Documents Food Stamps Postage Stamps (canceled or uncanceled) Checks or Drafts drawn by Government Agencies Internal Revenue Stamps (canceled or uncanceled) Passports Immigration Papers Motor Vehicle Licenses and Titles House and Property Titles and Deeds EP2030...
  • Page 17: General

    Copyrighted Works without permission of the copyright owner In addition, it is prohibited under any circumstances to copy domestic or foreign currencies or Works of Art without permission of the copyright owner. When in doubt about the nature of a document, consult with legal counsel. EP2030...
  • Page 18 Safety Notes EP2030...
  • Page 19: Allgemeine Informationen Über Das Kopiersystem

    Erlaubt den automatischen Einzug mehrerer Originale. Zehnfach-Sorter S-106 <Zubehör> Sortiert oder gruppiert Kopien in bis zu 10 Kopiensätze. Heftsorter ST-104 <Zubehör> Sortiert oder gruppiert Kopien automatisch in bis zu zehn Kopiensätze, die auch geheftet werden können. Duplexeinheit AD-11<Zubehör> Erstellt zweiseitige Kopien. EP2030...
  • Page 20: Duplex-Originaleinzug Afr-12

    <Zubehör> Zieht Originale automatisch ein und kann zweiseitige Originale wenden. EP2030 Der EP2030 ist mit zwei Papiermaga- zinen und einer Einzelblattanlage aus- gestattet, die mit bis zu 550 Blatt Papier gefüllt werden können. Mit der Einzel- blattanlage können Sie Kopien auf Pa-...
  • Page 21: Bezeichnung Der Bauteile

    Coronaeinheiten gereinigt werden müssen (siehe Seite 7-8) 1. Papiermagazin: Faßt bis zu 250 Blatt Papier (siehe Seite 1). Die Papierführungen sind verstellbar, so daß unter- schiedliche Papierformate verwendet werden können. 2. Papiermagazin: Faßt bis zu 250 Blatt Papier (siehe Seite 5-3). EP2030...
  • Page 22 Werden Kopien von großen Papierformaten erstellt, Einzelblattanlage: ziehen Sie die Verlängerung heraus (siehe Seite 13). Rechte Verkleidungs- Öffnen Sie diese, um einen Papierstau zu entfernen klappe: (siehe Seite 5-15). Gesamtkopienzähler: Zeigt den aktuellen Stand der bisher erstellten Kopien an. EP2030...
  • Page 23: Innen Im Kopierer

    Hält das Originals auf dem Originalglas in der ange- legten Position. Originalglas: Legen Sie das Original mit der Abbildung nach unten auf das Originalglas. Coronareiniger Bedienen Sie den entsprechenden Coronareiniger, um (oben/unten): den gewünschten Coronadraht zu säubern (siehe Seite 7-8). EP2030...
  • Page 24 Kopierer zu entfernen. Trommeltrocknungs- Wird eingeschaltet, wenn die Trommel getrocknet wer- schalter: den soll, z. B. bei Kondensation (nur für Kundendienst). Lösehebel für die Halten Sie diesen hoch, wenn die Fixiereinheit aufge- Fixierheinheit: klappt wird (siehe Seite 5-16). EP2030...
  • Page 25: Zubehörteile

    (nur ST-104) (siehe Seite 5-9). Lösehebel des Heftk- Heben Sie diesen Lösehebel an, um den Heftklammer- lammerbehälters: behälter auszuwechseln (nur ST-104) (siehe Seite 5-9). Sorterfächer: Nehmen sortierte oder gruppierte Kopien auf. Lösehebel: Drücken Sie diesen, um den Sorter zu öffnen (siehe Seite 5-28). EP2030...
  • Page 26 Papierführung: Öffnen Sie diese, um einen Papierstau zu beheben (siehe Seite 5-23). Papiermagazinunterschrank PF-112 3. Papiermagazin: Faßt bis zu 2.500 Blatt Papier (siehe Seite 5-5). Papiersenktaste: Drücken Sie diese, bevor Sie das Papiermagazin öffnen oder schließen (siehe Seite 5-5). EP2030...
  • Page 27: Tasten Und Anzeigen Im Bedienfeld

    Drücken Sie diese, um das gewünschte Papierformat oder die automatische bzw. manuelle Papierwahl auszuwählen (siehe Seite 3-16). Reprofaktortasten : Drücken Sie diese, um einen festen Reprofaktor auszuwählen (siehe Seite 3-19). 1:1: Drücken Sie diese, um eine Kopie im Originalformat (100%) zu erstellen. EP2030...
  • Page 28 Drücken Sie diese, um die Heftrandfunktion zu aktivieren (siehe Seite 3-35). Taste DECKBLATT Drücken Sie diese, um die Deckblattfunktion zu aktivieren (siehe Seite 3-37). Taste PROGRAMM- Drücken Sie diese, um ein gespeichertes Kopierpro- SPEICHER gramm wieder aufzurufen (siehe Seite 2-18). 2-10 EP2030...
  • Page 29 Fotoleitertrommel zu beseitigen (siehe Seite 4-3). Taste TONER Drücken Sie diese, um die zusätzliche Tonerzugabe zu aktivieren. Die Kopien werden dunkler (siehe Seite 4-3). Taste Durch mehrfaches Drücken dieser Taste werden nach- KOPIENZÄHLER einander alle Werte der Kopienerfassung angezeigt (siehe Seite 4-2). EP2030 2-11...
  • Page 30: Display

    Zeigt an, daß die Entwicklereinheit ausgewechselt wer- anzeige den muß. Wechseln Sie die Entwicklereinheit aus (siehe Seite 5-30). Spezialpapieranzeige Die Spezialpapierfunktion ist aktiviert (siehe Seite 3-18). Papiermangelanzeige Zeigt an, daß das ausgewählte Papiermagazin kein Papier mehr enthält. Füllen Sie Papier nach (siehe Seite 5-1). 2-12 EP2030...
  • Page 31: Ein- Und Ausschalten/Rücksetzen

    Nach ca. 30 Sekunden erlischt die Warteanzeige, und die Start-Taste leuchtet grün. Der Kopierer ist kopierbereit. 50%~200% Auto Auto Auto Auto Full Size Impression Start FLS. FLS. Arrêt Lighter Darker Stop Pouce Inch Papier Full Size Paper 1139O4702A EP2030 2-13...
  • Page 32: Grundstellung

    Orig. Ö Kopie: Von einseitigem Original auf einseitige Kopie Ausgabefunktion: Nicht-Sortieren Die Grundstellung für Orig. Ö Kopie ist 1 Ö 2, wenn der Kopierer mit einer Duplexeinheit ausgestattet ist. An der Grundstellung können Änderungen vorgenommen werden (Bedienerprogramm siehe Seite 4-4). 2-14 EP2030...
  • Page 33: Sonderfunktionen

    (siehe Seite 4-9). Automatischer Kopierstart Selbst während der Aufwärmphase des Kopierers können Sie den automatischen Kopierstart aktivieren, indem Sie Originale in den automatischen / Duplex-Originaleinzug einlegen und die Start-Taste drücken. Der Kopiervorgang wird sofort nach der Aufwärmphase Automatische Ausschaltung ausgelöst. EP2030 2-15...
  • Page 34: Unterbrechung

    Einstellungen werden wiederhergestellt. Tips Wenn beim aktuellen Kopiervorgang zweiseitiges Kopieren oder die Deckblattfunktion gewählt wurden, kann die Unterbrechung nicht aktiviert werden. Falls im aktuellen Kopiervorgang Sortieren, Sortieren-und-Heften oder Gruppieren aktiviert wurde, wird automatisch beim Aktivieren der Unterbrechung Nicht-Sortieren ausgewählt. 2-16 EP2030...
  • Page 35: Energiesparfunktion

    Als Zeitraum, nach dessen Ablauf die Energiesparfunktion aktiviert wird, können über das Bedienerprogramm 1 bis 98 oder 240 Minuten eingestellt werden (siehe Seite 4-9). HINWEIS è Der Kopierer wird ausgeschaltet, wenn die Automatische Ausschaltung bei gleichzeitig aktivierter Energiesparfunktion aktiviert wird. EP2030 2-17...
  • Page 36: Programmspeicher

    Programmspeicher gespeichert. è Um ein Programm aufzurufen, drücken Sie die Taste PROGRAMMSPEICHER. HINWEIS è Haben Sie ein falsches Programm gespeichert, oder wollen Sie im vorhandenen Programm etwas ändern, wiederholen Sie bitte die Schritte 1 bis 3. 2-18 EP2030...
  • Page 37: Making Copies

    3-4. è Load the originals face up in the Automatic/Duplexing Document Feeder, see page 3-9. To change the copy paper size Paper è Press the Paper Select Key to select the desired paper size, see page 3-16. EP2030...
  • Page 38 Book è Press the Orig. Ö Copy Key to Book select the 2-sided copy mode, see page 3-23. Orig. Copy To sort copies è Press the Finishing Key to Group select the desired finishing mode, see page 3-28. Finishing EP2030...
  • Page 39 Key Pad. è If you have entered an incorrect number, press the Clear Key, then enter the correct number. Starting the copy cycle. è Press the Start Key. è To stop the copy cycle, press the Stop Key. EP2030...
  • Page 40: Placing Originals

    (Using plain paper or thick paper) Raise the Original Cover. Place the original face down on the Original Glass. Align the rear left corner of the original with the marker on the Original Width Scale. Gently lower the Original Cover. EP2030...
  • Page 41: Highly Transparent Originals

    è When using wrinkled or curled originals, the original size might not be detected correctly. So, select the copy paper size and do not use the Auto Paper Select Mode. Copy Paper Size, see page 3-16. EP2030...
  • Page 42: Making Copies From A Book Using Book Copy Mode

    è Do not place an original weighing more than 3kg on the Original Glass. è When placing an open book, do not press the book hard on the Original Glass, as trouble could result. EP2030...
  • Page 43: Using The Automatic/Duplexing Document Feeder

    è For a Lightweight original (40g/m to 50g/m ), it is recommended to place it directly onto the Original Glass or to make copies using the SADF Mode (Single Automatic Document Feeding Mode), see page 3-11. EP2030...
  • Page 44: Originals Not Suitable

    Continuous Stapled and other thin forms originals paper Wrinkled or Thick paper dog-eared original NOTE è For any of these types of originals, place the original manually on the Original Glass to make a copy, see page 3-7. EP2030...
  • Page 45: Loading The Originals

    Make sure that the top level of the original stack does not exceed the Ä marking. è Make sure that the Document Guide Plate is in touch with the edges of the original stack. If it’s not pressed snugly against the original stack, skewed feeding could result. EP2030...
  • Page 46: Using The Mixed Original Detection Mode

    Document Guide Plate. Then, slide the front Document Guide Plate against the front edges of the originals with the greatest width. Press the Mixed Original Detection Key. Manual Mixed Orig. Det. Staple 2in1 Sort Sort & Staple 3-10 EP2030...
  • Page 47: Using The Single Automatic Document Feeding Mode (Sadf Mode)

    è Be sure to correct any fold or curl in the original. The original is automatically taken up and the copy cycle is started. Making sure that the Start Key lights up green again, insert the next original. EP2030 3-11...
  • Page 48: Originals Not Suitable For The Automatic/Duplexing Document Feeder

    Original Positioning Plate Original Width Scale. Then press the rear edge of the original up against the Original Positioning Plate at the rear side of the Glass. Original Width Scale Gently lower the Automatic/Duplexing Document Feeder. 3-12 EP2030...
  • Page 49: Manual Bypass Copying

    Capacity of the Multi Bypass Tray Plain paper ... Up to 50 sheets Plain paper (once-copied paper) ... Up to 20 sheets Thick paper, translucent paper ... Up to 20 sheets OHP transparencies ... Up to 5 sheets EP2030 3-13...
  • Page 50: Using The Multi Bypass Tray

    è Before inserting, fan the paper stack well if you are using OHP transparencies or translucent paper. è Correct any curl if you are using thick paper. è The paper will be copied on the side facing up. 3-14 EP2030...
  • Page 51 Press the Start Key to start the copy cycle. IMPORTANT è When making multiple copies using OHP transparencies, set the Copy Tray into the upper position if there is no Sorter or Staple Sorter mounted. EP2030 3-15...
  • Page 52: Copy Paper Size

    Press the Paper Select Key to set the copier into the Auto Paper Auto mode. FLS. Inch Paper Useful Tip This mode is efficient when you want to make copies on paper of the same size as your originals automatically. 3-16 EP2030...
  • Page 53: Manual Selection

    For example, you can make up to 500 copies without interruption if the 1st and 2nd drawers are loaded with paper of the same size and in the same direction. EP2030 3-17...
  • Page 54: Special Paper Setting

    Auto paper mode. This allows you to make copies on recycled paper first. The special paper setting can be made using the User’s Choice Mode, see page 4-11. 3-18 EP2030...
  • Page 55: Zoom Ratio

    Auto Size Mode Indicator Auto Size lights up. Select the copy paper size, see page 3-16. FLS. Inch Paper Useful Tip This mode is very helpful for neat filing when you need to make copies from originals of assorted size. EP2030 3-19...
  • Page 56: Fixed Zoom Ratios

    You can hold down the key to change the ratio quickly. Hold down the key until the desired zoom ratio is reached 0.5~2.0 Useful Tip To save time, first select the fixed zoom ratio nearest to the target ratio before using theorKey. 3-20 EP2030...
  • Page 57: Image Density

    User’s Choice, either “Darker” or “Lighter”, see page 4-7. The copier has been factory-set to automatically select the Auto Exposure Mode. The User’s Choice can be used to change this default setting to the Manual Exposure Mode, see page 4-7. EP2030 3-21...
  • Page 58: Manual Exposure Mode

    Photo Mode level. è To make the image darker: Lighter Darker Press or hold down the Auto / Photo Exposure Control Key è To make the image lighter: Press or hold down the Exposure Control Key 3-22 EP2030...
  • Page 59: Original Ö Copy Type

    The “1-sided1-sided” type is the default setting in the initial mode. 2-sided Ö 1-sided Select this mode to make 2-sided copies from 1-sided originals. (Only when the Duplex Unit is mounted.) 2-sided Ö 2-sided Two originals can be copied onto one copy. EP2030 3-23...
  • Page 60 Book Ö 2-sided Select this mode to make a 2-sided copy of an open book. Each page of the open book will be copied onto one side of the copy. (Only when the Duplex Unit is mounted.) 3-24 EP2030...
  • Page 61: Selecting Original Ö Copy Type

    Original Ö Copy type. Book Book Orig. Copy Each time the left Original Ö Copy Key is pressed, the newly selected original type indicator lights as shown below. If there are no lights, 1-sided Ö 1-sided is selected. EP2030 3-25...
  • Page 62 If there are no lights, 1-sided Ö 1-sided is selected. 2in1 Book Useful Tip The “1-sided Ö 1-sided” type is the default setting in the initial mode. Book This default setting can be changed using the User’s Choice, see page 4-9. 3-26 EP2030...
  • Page 63: Instructions For Loading Originals

    1-sided Ö1-sided (2in1), or 1-sided Ö 2-sided (2in1) Mode, check the number of originals. If an odd number of 1-sided originals are used, add one blank sheet of paper at the end of the original set. Originals 2-Sided Copies 2-in-1 Copies Blank Sheet of Paper EP2030 3-27...
  • Page 64: Finishing Mode

    The copier has been factory-set to automatically select Non-Sort. Also, the copier automatically switches between the Sort and Non-Sort mode depending on the number of originals loaded in the Automatic Document Feeder. User’s Choice can, however, be used to change this default setting, see page 4-4. 3-28 EP2030...
  • Page 65 This mode allows you to staple copy sets already made in the Sort Mode or copy stacks made in the Group Mode. (Only when the Staple Sorter is mounted.) This feature is efficient for stapling originals after making copies. Sorting or Grouping Manual Staple Originals EP2030 3-29...
  • Page 66: Selecting The Finishing Mode

    Up to 25 sheets Sort/Group/Sort-and-Staple Mode è Sorter Bin Capacity 1st to 10th Bin Up to 25 sheets Thick paper, translucent paper, and OHP transparencies cannot be used for making copies in the Sort, Group, or Sort-and-Staple Mode. 3-30 EP2030...
  • Page 67: Using The Manual Staple Mode

    Make sure of the stapling position and press the paper stack against the bracket. è Up to 50 sheets of (plain) paper can be stapled. è Never attempt to reach for the stapling position. This can be dangerous. EP2030 3-31...
  • Page 68 Making Copies Press the Manual Staple Key. The paper stack will be stapled. Manual Staple Useful Tip This feature is efficient for stapling originals after making copies. 3-32 EP2030...
  • Page 69: Instructions For Loading Originals For Finishing Mode

    Placing the Original on the Original Glass Place the original with its stapling position at the upper right corner as shown in the illustration. Stapling Position Press the Manual Staple Key to staple copy sets or a copy stack. EP2030 3-33...
  • Page 70: Auto Dual Function

    If the Number of Copies Selected Exceeds 50 in the Non-Sort Mode The capacity of the 1st Bin is 50 in the Non-Sort Mode. If more than 50 copies are made in the Non-Sort mode, the Sorter uses the 1st, 2nd, and subsequent Bins to hold those excess copies. 3-34 EP2030...
  • Page 71: File Margin Mode

    File Margins NOTE è You need to change the setting of the File Margin function of User’s Choice according to the type of originals to be used when making copies in the File margin mode, see page 4-5. EP2030 3-35...
  • Page 72: Loading The Originals

    Setting the File Margin Mode Place the original in the correct original direction. Press the File Margin Key to set the copier into the File Margin Mode. Margin Press the OriginalCopy Key to select the desired job type. Book Book Orig. Copy 3-36 EP2030...
  • Page 73: Cover Mode

    This mode can only be selected when the copier is equipped with the Automatic/Duplexing Document Feeder and the Multi Bypass Tray. è This mode cannot be selected when 1-sided Ö 2-sided, 1-sided Ö 2-sided (2in1), Book Ö 1-sided, or Book Ö 2-sided Mode is Selected. EP2030 3-37...
  • Page 74: Using The Cover Mode

    Plain paper Up to 50 sheets Thick paper, translucent paper Up to 20 sheets è OHP transparencies Up to 5 sheets Load the originals into the Automatic/Duplexing Document Feeder. Press the Cover Key to set the Cover Mode. Cover 3-38 EP2030...
  • Page 75: Using The User Mode

    (the same size as set for “Size”). Counter Display The Zoom Ratio Indicator shows the upper 3 digits of the count and the Multi-Copy Display shows the lower 2 digits of the count. Example : The count is 12,345 (copies). 0.5~2.0 EP2030...
  • Page 76: Using The Meter Count Function

    Total Size 2-sided Total 2-sided Size With the count of the 2-Sided Size Counter displayed, press the Meter Count Key. This returns the copier to the normal state. EP2030...
  • Page 77: Toner Replenisher/Drum Dehumidifier

    Press the Drum Dehumidify Key. This Drum sets the copier into the Drum Dehumidify Dehumidifier Mode which lasts for 90 seconds. Useful Tip A copy cycle can be initiated even while the copier is in the Drum Dehumidifier Mode. EP2030...
  • Page 78: User's Choice

    Select whether to enable the Mixed Original Detection function or not when power is turned ON or panel reset on the copier equipped with an Automatic/Duplexing Document Feeder. Setting Description Initial Setting Mixed Original Detection function ON Mixed Original Detection function OFF EP2030...
  • Page 79: Lightweight Original

    Setting Description Initial Setting The original has a file margin The original does not have a file margin EP2030...
  • Page 80: Priority Paper Size/Source

    8-1/2” x 14” (L) U-12 AP/AS/Manual Priority Select the priority copying mode that is automatically selected when the Power Switch is turned ON or Panel Reset key is pressed. Setting Description Initial Setting Auto Paper (AP) Auto Size (AS) Manual EP2030...
  • Page 81: Default Auto Exposure Level

    Auto Exposure Mode as Default Setting Description Initial Setting Default Mode Exposure Setting in Manual Mode Auto Manual EXP1 Auto Manual EXP2 Auto Manual EXP3 Auto Manual EXP4 Auto Manual EXP5 Auto Manual EXP6 Auto Manual EXP7 Auto Manual EXP8 Auto Manual EXP9 EP2030...
  • Page 82: U-15 Default Finishing Mode

    1 2 3 4 5 6 7 8 9 number becomes greater. Lighter Darker U-15 Default Finishing Mode Determine the priority finishing mode selected when the copier is equipped with a finishing option. Setting Description Initial Setting Non-Sort Sort Group Sort-and-Staple EP2030...
  • Page 83: Priority Orig. Ö Copy Type

    1 to 98 min., or be set to 240 min. The initial setting is 15 min. Setting Description Initial Setting Enabled: 1 min. Enabled: 2 min. Enabled: 3 min. Enabled: 98 min. Enabled: 240min. EP2030...
  • Page 84: Auto Panel Reset For Plug-In Counter

    Enabled: 2 min. Enabled: 3 min. Enabled: 98 min. Enabled: 240min. * If you want to disable the Auto Shut OFF function, first select “1” in the Non-Auto Shut OFF Mode then select “0” in this Mode, see page 4-5. 4-10 EP2030...
  • Page 85: U-51 To 54 Special Paper Setting

    3rd Drawer (Setting is possible only when the Paper Feed Cabinet is mounted.) U-54 : 4th Drawer (Setting is possible only when the Paper Feed Cabinet is mounted.) Setting Description Initial Setting Special paper setting is not made. Special paper setting is made for the drawer. EP2030 4-11...
  • Page 86: Making The User's Choice Mode Settings

    If you have pressed an incorrect number, press the Clear Key, then enter the correct number. Press the Start Key. This enters the choice code selection and the current setting of the choice code is shown on the Multi-Copy Display. Zoom Ratio Indicator Multi-Copy Display 4-12 EP2030...
  • Page 87 Useful Tip Repeat steps 2 to 6 to make new settings for other User’s Choices. Press the Panel Reset Key. This allows the copier to leave the User’s Choice Mode, and the control panel shows the initial settings again. EP2030 4-13...
  • Page 88 Using the User Mode 4-14 EP2030...
  • Page 89: When An Indicator Lights Up

    Drawer. Inch Lighter Darker Auto / Photo Paper Example: 1st Drawer has run out of paper. Adding Paper 1st Drawer Slide out the 1st Drawer and press down the Paper Lifting Plate. Slide out the Edge Guides. EP2030...
  • Page 90 Slide the Edge Guides up against the paper. Gently slide the Drawer back in. NOTE è When loading Inch Size paper into the Drawer flip the Marketing Area Switch, located in the rear left corner of the Drawer to “Inch”. EP2030...
  • Page 91: 2Nd Drawer

    Make sure that the paper stack rests under the two catches of the Drawer. NOTE è The paper should be loaded no higher than the Ä (Max. Level Indicator) on the Edge Guide. Gently slide the Drawer back in. EP2030...
  • Page 92: 3Rd/4Th Drawer

    Load the paper stack into the Drawer so that its front side faces down. NOTE Max. è The paper should be loaded no higher than the Ä (Max. Level Indicator) on the Edge Guide. Gently slide the Drawer back in. EP2030...
  • Page 93: 3Rd Drawer

    Drawer, front side face down. Press the leading edge of the paper stack tightly up against the right side of the Drawer. NOTE è The paper should be loaded no higher than the Ä (Max. Level Indicator). EP2030...
  • Page 94 Drawer. NOTE è The paper should be loaded no higher than the (Max. Level Indicator). Gently slide the Drawer back in and press the Paper Descent Key. EP2030...
  • Page 95: When The Add Toner Indicator Lights Up

    Swing open the Toner Bottle Holder and pull out the old Toner Bottle. Tap the new Toner Bottle on a hard surface, such as a desk, several times. Then, turm the Toner Bottle over and tap it several times again in the same manner. Shake the new Toner Bottle well. EP2030...
  • Page 96 Use ONLY the specified toner for this copier. Using any other toner could result in image trouble. Auxiliary Toner Replenisher Mode Use the Auxiliary Toner Replenisher Mode if the image is light immediately after the Toner Bottle has been replaced with a new one, see page 4-3. EP2030...
  • Page 97: When The Add Staples Indicator Lights Up

    Full Size Paper Replacing the Staple Cartridge Press the Lock Release Lever of the Staple Sorter and slide it away from the copier. Open the Stapler Door. While lifting the Lever upward, pull the Staple Cartridge out of its port. EP2030...
  • Page 98 Break off any portion of the belt that hangs out of the Cartridge. Insert the new Staple Cartridge until it clicks into position. Close the Stapler Door and slide the Staple Sorter back against the copier. Place a sheet of paper into the 1st Bin of the Staple Sorter. 5-10 EP2030...
  • Page 99 Removing the Staple Cartridge before then will result in stapling trouble. è Immediately after the new Staple Cartridge has been loaded, be sure to follow steps 7 to 9. è Do not turn the green gear near the Cartridge inside the Stapler Unit. EP2030 5-11...
  • Page 100: When The Closure Failure Indicator Lights Up

    Full Size Correct the closure failure by following Lighter Darker the procedure given below. Auto / Photo Full Size Check that the Front Door is closed. Monitor Display Check Location Check the Automatic/Duplexing Document Feeder. Monitor Display Check Location 5-12 EP2030...
  • Page 101 When an Indicator Lights Up Check that the Right Door is closed. Monitor Display Check Location Check that the Left Door is closed. Monitor Display Check Location Check that the Lower Right Door is closed. Monitor Display Check Location EP2030 5-13...
  • Page 102 Check that the Lower Left Door is closed. Monitor Display Check Location Check that the Duplex Unit is locked into position. Monitor Display Check Location Check that the Sorter or Staple Sorter is in position. Monitor Display Check Location 5-14 EP2030...
  • Page 103: When The Misfeed Indicator Lights Up

    Check the Monitor Display for the location of the misfeed and clear the misfed sheet of paper according to the procedure given for each location. Copier, see page 5-16. Paper Feed Cabinet, see page 5-21. Automatic/Duplexing Document Feeder, see page 5-24. EP2030 5-15...
  • Page 104: Misfeed Clearing Procedures

    Be careful not to touch the areas marked with High Voltage with bare hands Caution: HOT Open the Front Door. Turn the Lock Release Lever clockwise counter to unlock and swing up the Upper Half of the copier. Then lock Stopper 5-16 EP2030...
  • Page 105 NOT touch any part except the Fusing Unit Handle (yellow). Remove any sheet of paper from the Transport Section. Slightly lift up the Upper Half of the copier and unlock Stopper Gently swing down and lock the Upper Half of the copier. Then, close the Front Door. EP2030 5-17...
  • Page 106: Copier (Paper Take-Up Section)

    Stopper Gently swing down and lock the Upper Half of the copier. Then, close the Front Door. Slide out the Drawer and unload the paper from the Drawer. Next, push down the Paper Lifting Plate. 5-18 EP2030...
  • Page 107: Copier (Multi Bypass Section)

    Copier (Multi Bypass Section) Unload the stack of paper from the Multi Bypass Tray. Open the Front Door. Turn the Lock Release Lever clockwise counter to unlock and swing up the Upper Half of the copier. Then lock Stopper EP2030 5-19...
  • Page 108 Slightly lift up the Upper Half of the copier and unlock Stopper Gently swing down and lock the Upper Half of the copier. Then, close the Front Door. Fan the paper and reload the paper stack onto the Multi Bypass Tray. 5-20 EP2030...
  • Page 109: Paper Feed Cabinet (Pf-206)

    Open the Lower Right Door and pull out the sheet of paper. Close the Lower Right Door. Slide the Drawer out of the copier. Unload the paper from the Drawer. Fan the paper and reload it. Slide the Drawer back in. EP2030 5-21...
  • Page 110: Paper Feed Cabinet (Pf-112)

    Press the Paper Descent Key. This releases the Drawer, allowing you to slide it out of the copier. Unload the paper from the Drawer. Fan the paper and reload it. Slide the Drawer back in and press the Paper Descent Key. 5-22 EP2030...
  • Page 111: Duplex Unit

    Transport Section. Close the Lower Right Door. Slightly lift up the Upper Half of the copier and unlock Stopper Gently swing down and lock the Upper Half of the copier. Then, close the Front Door. EP2030 5-23...
  • Page 112: Duplexing Document Feeder

    Open and close the Front Door to reset the Misfeed Indicator on the control panel. Duplexing Document Feeder Remove the original stack from the Document Feed Tray. Swing open Document Feed Unit Door and gently pull out the original. 5-24 EP2030...
  • Page 113 Original Glass and lower the Duplexing Document Feeder. Return the number of originals indicated on the Display to the bottom of the original stack removed in step 1 and reload it onto the Document Feed Tray. Example : Return two originals. EP2030 5-25...
  • Page 114: Automatic Document Feeder

    Door and gently pull out the original. Close Carefully pull out the original from the Document Exit Unit. Raise the Automatic Document Feeder. Opening the Document Feed Unit Guide Plate, gently pull out the original from the Unit. 5-26 EP2030...
  • Page 115 Original Glass and lower the Automatic Document Feeder. Return the number of originals indicated on the Display to the bottom of the original stack removed in step 1 and reload it onto the Document Feed Tray. Example : Return two originals. EP2030 5-27...
  • Page 116: Sorter/Staple Sorter

    When an Indicator Lights Up Sorter/Staple Sorter Holding the Lock Release Lever, slide the Sorter/Staple Sorter away from the copier. Pull out the copy from the Transport Section. Slide the Sorter/Staple Sorter back to the copier. 5-28 EP2030...
  • Page 117: When The Call-Tech.-Rep. Indicator Lights Up

    When calling your Technical Representative, give him or her the malfunction code shown across the Zoom Ratio Indicator and Multi- Copy Display. <Example> Malfunction Code: C0010 0.5~2.0 è After calling your Technical Representative, turn OFF the Power Switch and unplug the power cord. EP2030 5-29...
  • Page 118: When The I. U. Service Life Indicator Lights Up

    Add Toner copies No new copy Indicator lights cycle can be Blinking initiated Whichever occurs first 5.000 copies made Useful Tip Replace the Imaging Unit as soon as possible once the I. U. Service Life Indicator has started blinking. 5-30 EP2030...
  • Page 119: Precautions For Handling

    40°C (104°F) or more. Do not store the I. U. in a humid place or subject to water splash. Do not store the I. U. upside down or titled. Do not subject the I. U. to vibration. EP2030 5-31...
  • Page 120: Removing The I. U. From The Copier

    Turn the I. U. Lock Release Lever and, while holding it down, pull the I. U. halfway out of the copier. Firmly grasp the I. U. with both hands and pull it all the way out of the copier. 5-32 EP2030...
  • Page 121: Unpacking / Setting Up The I. U

    Take the Starter Bottle and the I. U. in its bag out of the Box. Take the I. U. out of the bag. Peel off the three pieces of tape and packing materials. Carefully pull the polyester tape from the I. U. EP2030 5-33...
  • Page 122 Be sure to push the I. U. into the locked position until a click is heard. Then, check the position of the Lock Release Lever, as shown in the illustration. NOTE è An improperly installed I. U. could be a cause of copier malfunction. 5-34 EP2030...
  • Page 123: Charging The Copier With Starter And Toner

    Holding the Starter Bottle so that its tab is on the upper side, shake it well. NOTE è Make sure that “MT Starter 104” is printed on the Starter Bottle. Peel off the tape from the Starter Bottle. EP2030 5-35...
  • Page 124 “0” light up and go out one after another, indicating that the copier is being charged with starter. When the copier has been completely charged with Starter, the indication on the Magnification Ratio Indicator changes to “1.000” and the cycle stops. 5-36 EP2030...
  • Page 125 Hold the Toner Bottle so that its tab is on the upper side, shake it well, and peel off the tape. Once the tape has been removed, hold the Bottle so that its toner port faces up. EP2030 5-37...
  • Page 126 Insert the Bottle all the way into the copier until the marking on the Bottle is aligned with the marking on the Bottle Holder. Then, swing in the Bottle Holder until it locks into position and close the Front Door. 5-38 EP2030...
  • Page 127: Quick Reference For Other Indicators

    Multi-Copy Display You have entered 51 or more If you press the Start Key, for the number of copies to the copier starts the copy be made in a 2-sided copy cycle to make only 50 cycle. copies. EP2030 5-39...
  • Page 128 When an Indicator Lights Up 5-40 EP2030...
  • Page 129: Troubleshooting

    Wipe the Original Glass clean Glass is dirty. with a soft dry cloth, see page 7-8. The original is not held tightly Place the original in position so against the Original Glass. that it is held tightly against the Original Glass. EP2030...
  • Page 130 Feeder correctly along the Document Guide Plates, see page 3-9. The originals may not be Raise the Document Feeder and suitable for use in the Document place the originals on the Feeder. Original Glass one at a time, see page 3-4. EP2030...
  • Page 131: The Copier Is Not Functioning As Designed

    The room circuit breaker is open. Close the room circuit breaker. turned ON. If these procedures do not correct the problem, turn OFF the Power Switch, unplug the power cord from the power outlet and contact your Technical Representative. EP2030...
  • Page 132 Troubleshooting EP2030...
  • Page 133: Miscellaneous

    Miscellaneous Miscellaneous Specifications Copier EP2030 Specification Type Desk Top Copier Platen Type Stationary Photoconductor Copying System Electrostatic Dry Powdered Image Transfer to Plain Paper Developing System Micro-Toning System Fusing System Lamp-Heated Roller Types of Originals Sheets, Books, and other three-dimensional objects...
  • Page 134: Duplexing Document Feeder Afr-12

    A3, B4: 30 sheets (80g/m Copy Productivity 100% First Copy with ADF A4C = 11 seconds or less Power Source DC24V supplied from copier Power Consumption 48W or less Dimensions Width: 610 mm, Depth: 505 mm, Height: 125 mm Weight 13.0 kg EP2030...
  • Page 135: Automatic Document Feeder Af-5

    A3, B4: 30 sheets (80g/m Copy Productivity 100% First Copy with ADF A4C = 11 seconds or less Power Source DC24V supplied from copier Power Consumption 48W or less Dimensions Width: 587 mm Depth: 505 mm Height: 125 mm Weight 12.0 kg EP2030...
  • Page 136: Sorter S-106

    Sort Mode, Group Mode Plain paper, Recycled paper 1st to 10th bin: 25 sheets / bin Power Source DC24V supplied from copier Power Consumption 72W or less Dimensions Width: 400 mm, Depth: 562 mm, Height: 404 mm Weight 15.8 kg EP2030...
  • Page 137: Staple Sorter St-104

    4th Drawer: 210 mm x 280 mmL to A3L Paper Feeding System Automatic feeding from drawer Total Drawer Capacity:1,000 sheets (500 sheets x 2) Power Source DC24V supplied from copier Dimensions Width: 610 mm,Depth: 595 mm,Height: 472 mm Weight 35.2 kg EP2030...
  • Page 138: Paper Feed Cabinet Pf-112

    Plain paper, Recycled paper:Weighing 60g/m to 90g/m Size:A5L to A3L Capacity Up to 50 sheets (60g/m to 90g/m Up to 20 sheets (91g/m to 157g/m Power Source DC24V supplied from copier Weight 14.2 kg Dimensions Stored in the Paper Feed Cabinet EP2030...
  • Page 139: Care Of The Copier

    è NEVER use a glass cleaner or any other detergent to avoid damage to the control panel keys and display. Original Pad Wipe the surface of the Original Pad clean with a soft cloth dampened with mild home detergent. EP2030...
  • Page 140: Original Glass

    Front Door Wipe the inside of the Front Door clean with a soft cloth. Corona Units Gently slide out the Upper Corona Unit Cleaning Lever as far as it goes. Gently slide the Cleaning Lever back into the original position. EP2030...
  • Page 141: Document Transport Belt

    Wipe the fresh surface clean with a soft cloth dampened with mild home detergent. Repeat these steps until the entire surface of the Belt is wiped clean. EP2030...
  • Page 142: Function Combination Matrix

    The functions can be combined. The functions can be combined conditionally. (See the conditions given below.) The functions cannot be combined. (The function set first takes precedence.) The functions cannot be combined. (The function set last takes precedence.) 7-10 EP2030...
  • Page 143: Conditions For Combined Functions

    A zoom ratio or a copy-job program set in the Interrupt mode cannot be stored in memory. Book Ö 1 or Book Ö 2 can be combined with the Sort-and-Staple mode, but no stapling action takes place. (The copier performs only book copying and sorting of copies, but not stapling.) EP2030 7-11...
  • Page 144: Description Of Copy Paper Size And

    8-1/4” x 11-3/4” 8-1/4” x 11-3/4” 210mm x 301mm LETTER 8-1/2” x 11” 216mm x 279mm GOVERNMENT 8” x 10-1/2” 203mm x 267mm LETTER QUARTO 8” x 10” 203mm x 254mm STATEMENT INVOICE 5-1/2” x 8-1/2” 140mm x 216mm 7-12 EP2030...
  • Page 145 1.414 x 2.000 x 1.733 x 1.224 x 2.000 105 x 148mm x 1.414 4-1/4” x 5-3/4” x 1.733 x 1.224 x 0.816 257 x 364mm x 0.577 10” x 14-1/4” x 0.707 x 0.500 x 1.154 EP2030 7-13...
  • Page 146 0.500 11” x 14” Legal x 0.772 279.4 x 355.6mm Foolscap x 0.772 Letter x 0.772 Invoice x 0.500 Legal Legal x 0.928 8-1/2” x 14” Foolscap x 0.785 215.9 x 355.6mm Letter x 0.607 Invoice x 1.214 7-14 EP2030...
  • Page 147 11” x 17” x 1.294 215.9 x 279.4mm 11” x 14” x 1.272 Invoice 11” x 17” x 2.000 5-1/2” x 8-1/2” 11” x 14” x 1.647 139.7 x 215.9mm Legal x 1.545 Foolscap x 1.529 Letter x 1.294 EP2030 7-15...
  • Page 148 Miscellaneous 7-16 EP2030...
  • Page 149 Index Index Numerics 1-sided > 1-sided ....................3-23 1-sided > 1-sided “2-in-1” .................3-24 1-sided > 2-sided ....................3-23 1-sided > 2-sided “2-in-1” .................3-24 2-sided > 1-sided ....................3-23 2-sided > 2-sided ....................3-23 2-Sided Size Counter ..................4-1 2-Sided Total Counter ..................4-1 Add Paper Indicator ....................5-1 Add Staples Indicator ..................5-9 Add Toner Indicator ....................5-7 AP/AS/Manual Priority ..................4-6...
  • Page 150 Index Default Auto Exposure Level ................4-7 Default Exposure Mode/Level ................4-7 Default Finishing Mode ..................4-8 Description of Copy Paper Size ............... 7-12 Display ......................2-12 Drum Dehumidifier Function ................4-3 Ein- und Ausschalten ..................2-13 Energiesparfunktion ..................2-17 Energy Saver ON Timing ...................
  • Page 151 Index Non-Sort Mode ....................3-28 Original > Copy Type ..................3-23 Photo Mode ......................3-22 Placing Originals ....................3-4 Priority Orig. > Copy Type ..................4-9 Priority Paper Size/Source .................4-6 Programmspeicher ...................2-18 Remove Copies Indicator .................5-39 Rücksetzung .....................2-15 Rücksetzungstaste ...................2-15 Size Counter .......................4-1 Sort Mode ......................3-28 Sort/Non-Sort Auto Switching ON/OFF ............4-10 Sort-and-Staple Mode ..................3-29 Special Paper Setting ................

Table of Contents