Minolta CF5001 User Manual page 122

8.
Position original(s).
9.
Press [START].
3-50
Output Mode for Machine with Finisher (continued)
See p. 3-4 to p. 3-9 for details on positioning originals.
Press [STOP] to suspend the scanning or printing job. See p. 3-13 for details.
Finisher primary (main) tray of Finisher FN-120/FN-9 gradually goes down
while printed materials output. DO NOT allow any object to interfere with the
operation of the tray on the left side of the finisher, as any interference may
cause damage to the finisher.
When the finisher exit tray capacity is exceeded due to the print
quantity selected, remove the copied sets as they exit; otherwise,
mishandled paper will occur.
Output Icons on the Basic Screen
Primary (Main) tray: Face down
Non-sort Sort (offset)
Primary (Main) tray: Face up
Non-sort Sort (offset)
Group (offset)
Group (offset)