Stop Scan/Print - Minolta CF5001 User Manual

FULL COLOR is already highlighted when the initial settings are restored.
The initial settings may have been altered by Key Operator. See p. 14-10 for
details.
Selecting SINGLE COLOR will display the popup menu to specify a color.
Touch the desired color key, then touch OK.
The selected color will be indicated under the COLOR MODE indication of the Basic
Screen, with the SINGLE COLOR key highlighted.
Touch CANCEL to restore the previous setting.
2.
Select additional copy conditions, as desired.
If the color adjustment is desired, see Section 7: Color Adjustment.
3.
Enter the desired print quantity from the control panel keypad.
See p. 3-10 for details on setting print quantity.
4.
Position original(s).
See p. 3-4 to p. 3-9 for details on positioning originals.
5.
Press [START].
Selecting Color Mode (continued)
3
Copying
Operations
Selecting
Color Mode
Positioning
Originals
Setting Print
Quantity
Set Job During
Warmup
Stop
Scan/Print
Copy Size
Multi-Sheet
Bypass Tray
Lens Mode
1-2, 2-2
2-1
Store Mode
Reserve
Job Status
Screen
Output without
Finisher
FS-115/215
Output Modes
Binding
Mode
3-3