Minolta CF5001 User Manual page 118

Secondary (Sub) Tray:
1 Face down non-sort exit outputs simplex copies and odd numbered duplex copies
face down, without offsetting the sorted sets.
2 Face down group exit outputs multiple copies of each original face down, without
offsetting the grouped sets upon exit.
3 Face up non-sort exit outputs simplex copies and odd numbered duplex copies face
up, without offsetting the sorted sets.
4 Face up group exit outputs multiple copies of each original face up, without offsetting
the grouped sets upon exit.
Face down
non-sort
The copier is initially set to output to Primary (main) tray in Sort mode.
Follow the procedure on the next page to change the output mode, as desired.
Specification for Output Modes with Finisher
❒ Incompatible with Sort mode: Using platen glass (unless Image Insert, Book Copy, or
Platen store mode is used), Folding, Stapling & Folding, Three-Folding, Trimming
❒ Incompatible with Staple mode: Using platen glass (unless Image Insert, Book Copy, or
Platen store mode is used), Folding, Stapling & Folding, Three-Folding, Trimming
3-46
Output Mode for Machine with Finisher (continued)
Face down
group
See Section 8 for the output modes using Finisher options.
Using excessively curled paper or some types of thin paper in Staple mode
may cause poor results in arrangement of the stapled sets.
3
2
1
Example:
Make 3 copied sets
Face up
non-sort
Face up
group