Minolta CF5001 User Manual page 101

Making Double-Sided Copies (1 2, 2 2) (continued)
Selecting UP BINDING will make copies upside down on the reverse side,
while RIGHT&LEFT BINDING copies normally.
Touch OK to return to the Basic Screen.
3.
Position original FACE DOWN on the platen glass according to the
original direction, then close the document feeder or original cover.
Be sure to start from the first page.
• See p. 12-9 for paper sizes detectable on the platen glass.
• See p. 3-8 for details on positioning originals.
• Use Non-Image Area Erase to prevent the black copy marks to be produced
4.
Touch 1 2 on the Basic Screen to highlight it.
The STORE key will be automatically highlighted on the screen.
DO NOT press [AUTO RESET] at this point, otherwise the platen mode will be
released to disable the copier from scanning the original placed on the platen
glass.
Binding mode
1
2
when scanning the original with the document feeder or original cover open.
See p. 10-30 to p. 10-31.
Copies
3 3
1
2 2
1 1
2
3 3
3
Copying
Operations
Selecting
Color Mode
Positioning
Originals
Setting Print
Quantity
Set Job During
Warmup
Stop
Scan/Print
Copy Size
Multi-Sheet
Bypass Tray
Lens Mode
1-2, 2-2
2-1
Store Mode
Reserve
Job Status
Screen
Output without
Finisher
FS-115/215
Output Modes
Binding
Mode
3-29