Minolta CF5001 User Manual page 64

3.
Adjust the position of the rear stopper.
To slide the rear stopper to the right, hold it at the upper part and slide it while pressing
down slightly.
On the other hand, hold the rear stopper at the lower part to slide it to the left.
4.
Place paper on the tray.
Load paper aligning it to the right side of the tray, then align the rear stopper to the paper.
2-24
Be sure to fix the side guide plate in position according to the size indication on
the tray bottom plate so that the machine can detect the correct paper size.
1
2
Be sure to press down the rear stopper when moving it to the right, and also be
sure to hold it at the lower part when moving it to the left. Do not move the rear
stopper forcibly, otherwise it may be damaged.
• Be sure that the rear guide plate is securely aligned to the paper; otherwise
machine trouble may occur.
• Do not load above the limit indicated on the side guide plate.
Loading Paper (continued)