Minolta CF3102 User Manual
  1. Manuals
  2. Brands
  3. Minolta Manuals
  4. Copier
  5. CF3102
  6. User manual

Minolta CF3102 User Manual

Minolta printer user manual
Hide thumbs Also See for CF3102:
Table of Contents

Advertisement

Quick Links

See also: Service Manual

User Manual

CF 2002/CF 3102
www.minoltaeurope.com
The essentials of imaging

Advertisement

Table of Contents

Troubleshooting

loading
Need help?

Need help?

Do you have a question about the CF3102 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Minolta CF3102

Summary of Contents for Minolta CF3102

  • Page 1: User Manual

    User Manual CF 2002/CF 3102 www.minoltaeurope.com The essentials of imaging...

  • Page 2: Table Of Contents

    For users in countries not subject to Class B regulations ...2-5 Acoustic noise (For European Users Only)...2-5 LED Radiation Safety...2-5 Ozone Release ...2-6 Installation Requirements ...2-7 Power Source...2-7 Installation Site...2-7 Space requirements...2-8 Operation Precautions...2-9 Operating environment...2-9 Proper use...2-9 Transporting the copier ...2-11 CF2002/CF3102 IVZ-1...
  • Page 3 Description of the Touch Panel ... 3-33 Enlarged Display Mode ... 3-33 Structure of the Display ... 3-34 Operating the Touch Panel... 3-36 Adjusting the Angle of the Control Panel ... 3-37 To adjust the angle of the control panel ... 3-37 IVZ-2 CF2002/CF3102...
  • Page 4 Making Copies...6-1 Practical Copy Examples ...6-5 To make a copy that is the same size as the original ...6-5 To make an enlarged copy of the document...6-7 To make a reduced copy of the document...6-9 To reduce paper use...6-11 CF2002/CF3102 IVZ-3...
  • Page 5 When the Copier Is Not Operating Correctly ... 8-25 Touch Panel Messages ... 8-26 Appendix Specifications ... 9-1 Copier CF2002/CF3102 ... 9-1 Duplex Unit AD-14... 9-3 Duplexing Document Feeder AFR-18 ... 9-3 Paper Feed Unit PF-118... 9-5 Large Capacity Cabinet PF-121 ... 9-5 Finisher FN-8 ...
  • Page 6 Paper Size and Zoom Ratio Tables ...9-9 Paper Sizes...9-9 Zoom Ratios...9-10 Consumables...9-13 Paper...9-13 Toner Cartridges ...9-13 Staple Cartridges ...9-13 Index...9-14 CF2002/CF3102 IVZ-5...
  • Page 7 IVZ-6 CF2002/CF3102...

  • Page 8: Introduction

    Introduction We Want You to Be a Satisfied Customer Thank you for choosing a Minolta CF2002/CF3102. This User Manual will provide you with all the important information you need to be able to put your copier in operation. You will find information...

  • Page 9: Explanation Of Manual Conventions

    Text formatted in this style describes the action that will ensure the desired results are achieved. [Copy] key The names of keys on the control panel are written as shown above. Introduction An illustration inserted here shows what operations must be performed. CF2002/CF3102...

  • Page 10: Explanation Of Basic Concepts And Symbols

    During copying, paper is supplied from the right side of the copier and fed into the copy tray on the top or the output option at the left with the printed surface of the copy facing down. The paper feed direction is shown by the arrows in the diagram below. CF2002/CF3102...

  • Page 11: Width" And "Length

    (X), the paper has a horizontal or landscape orientation, indicated by either “C” or Portrait and Landscape Portrait With the “portrait” orientation, the paper is vertical, like a portrait. Landscape With the “landscape” orientation, the paper is horizontal, like a landscape. Introduction CF2002/CF3102...

  • Page 12: Display Icons

    : Second side of a double-sided copy on thick paper 2 : Second side of a double-sided copy on thick paper 3 Paper Supply Icons The icons shown below are displayed to indicate the amount of paper that remains. : The paper is low. : The paper is empty. CF2002/CF3102...

  • Page 13: Energy Star

    ® ENERGY STAR on utility bills and helps protect the environment. Trademarks and Registered Trademarks DiALTA is a registered trademark of Minolta Co., Ltd. All other product names mentioned are trademarks or registered trademarks of their respective companies ® Partner, we have determined that this machine ®...

  • Page 14: Precautions

    This symbol warns against dismantling the device. A black circle indicates an imperative course of action. This symbol indicates you must unplug the device. CF2002/CF3102 Ignoring this warning could cause serious injury or even death. Ignoring this caution could cause injury or damage to property.

  • Page 15: Warning

    Do not throw the toner cartridge or toner into an open flame. The hot toner may scatter and cause burns or other damage. Connect the power cord to an electrical outlet that is equipped with a grounding terminal. Precautions CF2002/CF3102...

  • Page 16: Caution

    Dust that accumulates between the plug terminals may cause a fire. • When unplugging the power cord, be sure to hold onto the plug. Pulling on the power cord could damage the cord, resulting in a fire or electrical shock. CF2002/CF3102...

  • Page 17: Precautions For Routine Use

    Be careful not to spill toner inside the copier or get toner on your clothes or hands. § If your hands become soiled with toner, immediately wash them with soap and water. § If toner gets in your eyes, immediately flush them with water, and then seek professional medical advice. Precautions CF2002/CF3102...

  • Page 18: Ce Marking (Declaration Of Conformity) For Users The European Union (Eu)

    There is no possibility of danger from the LED optical radiation, because the LED optical radiation level does not exceed the accessible radiation limit of class 1 under all conditions of operation, maintenance, service and failure. CF2002/CF3102...

  • Page 19: Ozone Release

    § Pour avoir la certitude de travailler dans un environnment réunissant des conditions de confort, santé et de sécurité, il est préférable de bien aérer la pièce ou se trouve l’appareil. Precautions CF2002/CF3102...

  • Page 20: Installation Requirements

    A location where ammonia or other organic gases are not generated A location that does not put the operator in the direct airflow of exhaust from the copier A location that is not near any kind of heating devices CF2002/CF3102...

  • Page 21: Space Requirements

    1839 (72-1/2) (11-1/4) 1271 (50) Note Be sure to allow a clearance of 100 mm (4 in.) or more at the back of the copier for the ventilation duct. 1432 (56-1/2) (21-1/4) (31-1/4) (11-1/4) CF2002/CF3102 Precautions Unit: mm (inch)

  • Page 22: Operation Precautions

    CAUTION If the ventilation duct at the top of the copier becomes blocked, the inside of the copier will accumulate heat, resulting in a malfunction or fire. § Do not place any objects over the ventilation duct. CF2002/CF3102...
  • Page 23 Be especially careful not to touch parts marked with warning labels, and their surrounding areas. § If you get burnt, immediately cool the skin under cold water, and then seek professional medical advice. 2-10 Precautions CF2002/CF3102...

  • Page 24: Transporting The Copier

    Adhesive that contains solvent (e.g., spray glue) may dissolve the toner on copies. Color copies have a thicker layer of toner than normal black-and-white copies. Therefore, when a color copy is folded, the toner at the fold may peel off. CF2002/CF3102 2-11...

  • Page 25: Legal Restrictions On Copying

    In addition, it is prohibited under any circumstances to copy domestic or foreign currencies, or works of art without permission of the copyright owner. When in doubt about the nature of a document, consult with legal counsel. 2-12 Precautions CF2002/CF3102...

  • Page 26: Features And Components

    Settings that are not programmed, such as the number of copies Data scanned using the “Scan to Memory” function Jobs queued to be printed Jobs saved with the “Memory Recall” function Stored zoom ratios, programmed Copy mode settings, Utility mode settings and UserBox settings are not erased. CF2002/CF3102...
  • Page 27 Do not turn off the copier while it is scanning or sending or receiving data, otherwise all scanned data or transmission data will be deleted. Do not turn off the copier while a queued job or stored data is waiting to be printed, otherwise the jobs will be deleted. Features and Components CF2002/CF3102...

  • Page 28: Default Settings

    For more details, refer to the advanced version of the User manual on the CD-ROM. The default settings that the copier resets all functions to can be specified using the Utility mode. For more details, refer to the advanced version of the User manual on the CD-ROM. CF2002/CF3102...

  • Page 29: Available Features

    Select the desired Original Orig Copy Settings Single-sided originals Select this setting to copy single- sided documents. Double-sided originals Select this setting to copy double- sided documents. Single-sided copies Select this setting to make single- sided copies. Features and Components Copy setting. CF2002/CF3102...
  • Page 30 Single-sided 4in1 copies Select this setting to reduce four document pages to fit one single- sided copy page. Double-sided 4in1 copies Select this setting to reduce eight document pages to fit one double- sided copy page. CF2002/CF3102...
  • Page 31 The double-sided original setting is only available if the optional duplexing document feeder is installed. The double-sided copy settings are only available if the optional duplex unit is installed. Booklet-binding is only available if both the optional finisher FN-8 and the duplex unit are installed. Features and Components CF2002/CF3102...

  • Page 32: Zoom

    Zoom settings for making reduced copies from common standard document sizes to standard paper sizes are available. Example 1: An A3-size document can be copied onto the smaller A4-size paper. Example 2: A B4-size document can be copied onto the smaller A4-size paper. CF2002/CF3102...
  • Page 33 In addition, up to two zoom ratios specified using the keypad can be stored for later use. “X/Y Zoom” function The copy size can be changed by specifying different scaling proportions (between ×0.250 and ×4.000) for the vertical and the horizontal dimensions. Features and Components to specify the desired zoom ratio. CF2002/CF3102...

  • Page 34: Paper

    Manual paper selection The tray or drawer containing the appropriate paper that you wish to use can be selected. “Bypass” setting Copies can be made onto the paper loaded into the manual bypass tray. CF2002/CF3102...

  • Page 35: Photo/Density

    Select this setting when copying photographs (documents) printed on photographic paper. “Printed Image” setting Select this setting when copying printed documents, such as pamphlets or catalogs. “Text” setting Select this setting when copying documents containing only text. 3-10 Features and Components CF2002/CF3102...
  • Page 36 “Screen Pattern” setting These settings reduce moire patterns that occur when copying printed photographs (which contain shading) or documents containing lines. Moire patterns: Repeating pattern that occasionally appears when images containing a repeating pattern or lines are copied CF2002/CF3102 3-11...

  • Page 37: Finishing

    Stapling Copies are stapled together before they are fed out. Stapling is only available if the optional finisher (FN-8 or FN-116) is installed. 3-12 Features and Components CF2002/CF3102...
  • Page 38 Features and Components Hole-punching Holes are punched in copies before they are fed out. Hole-punching is only available if the punch kit (PK-4) is installed in the optional finisher (FN-8). CF2002/CF3102 3-13...

  • Page 39: Color

    “Black” setting With this setting, copies are produced in black and white, regardless of the document type. If this setting is selected, even a color document will be copied in black and white. 3-14 Features and Components CF2002/CF3102...

  • Page 40: Components And Their Functions

    The printer can be set up on the copy desk. By setting up the printer on the copy desk, the printer can be placed on the floor instead of on a desk, keeping the entire surface of the desk free.
  • Page 41 Turns over copies, allowing double-sided copies to be made automatically. • If a printer controller (CN3102Pro or CN3102e) and the duplex unit are installed on the CF3102, the memory must be expanded. If the optional memory is not installed, automatic double-sided copying cannot be performed.
  • Page 42 For more details, refer to the manual of the printer controller. Stationary printer controller that allows the copier to be used as both a color printer and a color scanner configured into a computer network For more details, refer to the manual of the printer controller.
  • Page 43 Color Color white 60 sheets 197 sheets sheets 20 sheets 149 sheets 46 sheets Features and Components With Optional Memory and the Hard Disk Installed Black & Black & Color white white 400 sheets Maximum 2,000 sheets 340 sheets CF2002/CF3102...

  • Page 44: Parts Names And Their Functions

    Power switch Lower right-side door 2nd drawer 1st drawer Front door Copy output tray CF2002/CF3102 Description Opened when clearing misfeeds Used for manual feeding of paper The paper is fed one sheet at a time. Special paper can be loaded.
  • Page 45 Used to specify the type of paper loaded into the 1st drawer Indicates the amount of paper remaining • Flashing: Indicates that there is little paper remaining • Lit: Indicates that the paper is empty Replenish the paper. Opened when servicing the copier CF2002/CF3102...
  • Page 46 Used for connecting the finisher hookup cord Used for connecting the printer’s power cord Used for connecting the scanner’s power cord Used for connecting the power cord for printer controller CN3102e Used for connecting the scanner hookup cord Used for connecting the scanner’s power cord...

  • Page 47: Inside Of Copier

    Used to remove the imaging unit Used to clean the electrostatic charger wire, for example, when incorrect copies are produced Used to install and replace the imaging unit Contains a toner cartridge for each color CF2002/CF3102...

  • Page 48: Supplies And Parts

    Waste-toner bottle Fusing unit Ozone filter Filter LED-cleaning tool Dust remover CF2002/CF3102 Description There are four toner cartridges: cyan (C), magenta (M), yellow (Y) and black (BK). The combination of the four toners generates full-color images. Generates the copied image...

  • Page 49: Duplexing Document Feeder (Optional)

    Misfeed-clearing cover 3-24 Features and Components Description Adjust to the width of the document. (See page 5-5) Load the documents to be copied face up. (See page 5-5) Collects documents that have been copied Opened when clearing a misfed document CF2002/CF3102...

  • Page 50: Duplex Unit (Optional)

    Features and Components Duplex Unit (Optional) Part Name Duplex unit door CF2002/CF3102 Description Opened when clearing a paper misfeed within the duplex unit 3-25...

  • Page 51: Finisher Fn-8 (Optional)

    Collects copies made with booklet binding Opened when replacing the staple cartridge Collect copies Opened when clearing a paper misfeed within the finisher Opened when clearing a paper misfeed within the finisher Opened when clearing a paper misfeed within the finisher Features and Components CF2002/CF3102...

  • Page 52: Finisher Fn-116 (Optional)

    Front door FN-4 Secondary paper output tray (sorted copies) Primary paper output tray (non-sorted copies) Upper cover CF2002/CF3102 Description Opened when clearing a paper misfeed within the finisher Collects copies that are sorted Collects copies that are not sorted (made with the “Non-Sort”...

  • Page 53: Paper Feed Unit (Optional)

    Paper Feed Unit (Optional) Part Name 3rd drawer 4th drawer 3-28 Features and Components Description Holds up to 500 sheets of paper As many as two units can be installed. The paper size can be adjusted freely. CF2002/CF3102...

  • Page 54: Large-Capacity Cabinet (Optional)

    Features and Components Large-Capacity Cabinet (Optional) Part Name 3rd drawer CF2002/CF3102 Description Holds up to 2,500 sheets of paper (See page 4-18) 3-29...

  • Page 55: Option Tray (Optional)

    Option Tray (Optional) Part Name Option Tray (optional) 3-30 Features and Components Description Collects copies CF2002/CF3102...

  • Page 56: Names Of Control Panel Parts And Their Functions

    • When the [Scan] key is pressed, the key indicator lights up in green to indicate that the machine is in Scan mode. • Scan mode is only available if the optional printer controller is installed. If the printer controller is not installed, scanning cannot be performed.
  • Page 57 • Press to display the touch panel screens enlarged. • In the Enlarge Display mode, the controls for frequently used functions are enlarged, making them easier to read. (See Advanced information on CD-R) • Use to adjust the contrast of the touch panel. CF2002/CF3102...

  • Page 58: Using The Touch Panel

    Press the [Enlarge Display] key in the control panel. The screen appears as shown below. Press the [Enlarge Display] key again to return the screen to the standard- sized screen. For more information see the Advanced information on CD-R. CF2002/CF3102 3-33...

  • Page 59: Structure Of The Display

    Structure of the Display Settings screen 3-34 Features and Components 1 Message display 2 Screen tabs 3 Available functions/settings 4 Selected settings CF2002/CF3102...
  • Page 60 The current settings are shown by messages and graphics. • Jobs* currently being performed or waiting to be performed are displayed (if printer controller CN3101e is installed). • The current sending/receiving status is shown by an icon (if printer controller CN3102Pro/CN3102e is installed).

  • Page 61: Operating The Touch Panel

    CAUTION Be careful not to damage the touch panel. § Never push down on the touch panel with force, and never press it using a hard or pointed object. 3-36 Features and Components CF2002/CF3102...

  • Page 62: Adjusting The Angle Of The Control Panel

    To adjust the angle of the control panel Pull the control panel release lever toward you, and then push down on the control panel. The angle of the control panel stops at the middle position. CF2002/CF3102 Upper position (base position) Middle position Lower position 3-37...
  • Page 63 The angle of the control panel stops at the lower position. To return the control panel to the upper position, pull the control panel release lever toward you, and then pull up on the control panel. 3-38 Features and Components CF2002/CF3102...

  • Page 64: Loading Paper

    2: If the optional duplex unit is used to make double-sided copies, only certain types of paper can be used. 3: If the optional finisher is used to sort, punch holes and staple, only certain types of paper can be used. CF2002/CF3102 Thick Plain Paper Paper 1...

  • Page 65: Paper Sizes

    — A5 L A5 C B6 L Card — — — — — — — — — — — — — Loading Paper Paper Length 140 mm to 457 mm — — A4 C B5 L B5 C — CF2002/CF3102...

  • Page 66: Paper Capacity

    3: If the optional finisher is used to sort, punch holes and staple, only certain types of paper can be used. 4: The paper size should be changed by your authorized service representative. CF2002/CF3102 Thick Plain Paper Paper 1...

  • Page 67: Paper Types To Be Avoided

    Overhead transparencies that have already been fed through the copier (even if the transparency is still blank) Paper that has been printed on by a heat-transfer printer or an inkjet printer Paper that is either extremely thick or extremely thin...

  • Page 68: Print Area

    A margin 3 mm (0.12 in.) from the trailing edge of the paper (B) A margin 3 mm (0.12 in.) on both sides of the paper (C). For details on using the copier to print from a computer when the printer controller is installed, refer to the manual for the printer controller.

  • Page 69: Loading Paper

    For paper of a non-standard size, first load the paper, and then adjust the lateral guides to the size of the loaded paper. For “A3Wide” paper, adjust the trailing-edge guides as shown in the illustration. Loading Paper Paper take-up roller CF2002/CF3102...
  • Page 70 CF2002/CF3102...
  • Page 71 § Do not load overhead projector transparencies lengthwise. If paper of a non-standard size has been loaded, slide the lateral guides against the edges of the loaded paper. Close the paper drawer. Loading Paper CF2002/CF3102...
  • Page 72 Second side of a double-sided copy on thick paper 2. (During manual double-sided copying) Thick3: Thick paper 3 Thick3 Second side of a double-sided copy on thick paper 3. (During manual double-sided copying) CF2002/CF3102 Envelope Thick3 Plain Plain Thick1 Thick1...
  • Page 73 Envelope: Envelopes OHP: Overhead projector transparencies If postcards are loaded, set the media type selection dial to “Thick2”. If label sheets are loaded, set the media type selection dial to “Thick1”. 4-10 Loading Paper CF2002/CF3102...

  • Page 74: Setting The Paper Size For The 1St Drawer

    To set the paper size Touch [Paper]. A screen that shows the specified paper size settings appears. Select the 1st drawer. Touch [Size Change]. The Input screen appears. CF2002/CF3102 4-11...

  • Page 75: To Set A Paper Size In Inch Measurements

    Select the 1st drawer, and then touch [Size Change]. Touch [Inch]. The Input screen appears with paper sizes in inch measurements. Select the setting for the size of paper that is loaded. Touch [Enter]. The paper size for the 1st drawer is set. 4-12 Loading Paper CF2002/CF3102...

  • Page 76: To Set A Non-Standard (Custom) Paper Size

    Using the keypad, type in the length of side Y for the paper that is loaded. The entered length of side Y appears. Touch [Enter], and then touch [Enter] in the Input screen. The paper size for the 1st drawer is set. CF2002/CF3102 4-13...

  • Page 77: To Store A Non-Standard (Custom) Paper Size

    Using the keypad, type in the length of side Y for the paper that is loaded. The entered length of side Y appears. Touch [Size Registration]. Touch either [1] or [2]. Touch [Enter], and then touch [Enter] in the Input screen. The custom paper size is stored. 4-14 Loading Paper CF2002/CF3102...

  • Page 78: To Select A Stored Non-Standard (Custom) Paper Size

    Select the 1st drawer, and then touch [Size Change]. Touch [Custom Size]. Touch either [1] or [2] to select the stored custom paper size. Touch [Enter], and then touch [Enter] in the Input screen. The paper size for the 1st drawer is set. CF2002/CF3102 4-15...

  • Page 79: Loading Paper Into The 2Nd Drawer Or A Paper Feed Unit

    Remove the trailing-edge guide, and then re-install it for the size of paper to be loaded. Slide the lateral guides to fit the size of paper to be loaded. 4-16 Loading Paper Paper take-up roller CF2002/CF3102...
  • Page 80 If the paper is not aligned well, a paper misfeed may occur. § We recommend replenishing the paper only after all of the paper in the drawer has been used. Close the paper drawer. CF2002/CF3102 4-17...

  • Page 81: Loading Paper Into The Large Capacity Cabinet

    Do not load so much paper that the top of the stack is higher than the o mark. § Special paper cannot be fed from the large capacity cabinet. If you wish to make copies onto special paper, feed it through the manual bypass tray or the 1st drawer. 4-18 Loading Paper CF2002/CF3102...
  • Page 82 § We recommend replenishing the paper only after all of the paper in the drawer has been used. Close the paper drawer. CF2002/CF3102 4-19...

  • Page 83: Specialty Paper" Function (2Nd, 3Rd Or 4Th Drawer)

    For more details, refer to the advanced version of the User manual on the CD-ROM. To set the “Specialty Paper” function Press the [Utility] key. Touch [User’s Choice: 2]. Touch [Specialty Paper]. Select the paper drawer that you wish to set. Select the desired special paper setting. 4-20 Loading Paper CF2002/CF3102...

  • Page 84: Loading Paper Into The Manual Bypass Tray

    For paper sizes in inch measurements, touch [Inch] to display a screen containing inch paper size settings. For a paper size other than the standard sizes listed on the screen, touch [Custom Size] to display a screen that allows you specify a size. CF2002/CF3102 4-21...
  • Page 85 Touch [Enter]. Touch [Paper Type]. The Paper Type screen appears. Select the setting for the type of paper that is loaded. Touch [Enter]. Open the manual bypass tray. Prepare one sheet of the paper. 4-22 Loading Paper CF2002/CF3102...
  • Page 86 Load the envelopes with the shorter side as the leading edge and with the side to be printed facing down, as shown. CF2002/CF3102 4-23...
  • Page 87 Lightly slide the paper into the feed slot as much as possible so that the edge of the paper is fed into the copier. Feed only one sheet of paper at a time. Copying can begin. 4-24 Loading Paper CF2002/CF3102...

  • Page 88: Original Documents

    Document Feed Method Multi-sheet feeding Manual feeding CF2002/CF3102 Features Using the duplexing document feeder, a multi-page document can be fed automatically. This feed method can also be used with double-sided documents, and is perfect for multi-page double-sided documents.

  • Page 89: Document Types

    Refer to the “Mixed originals paper sizes” table below. size Paper capacity 100 sheets (80 g/m Orientation Face-up, Normal direction Original Documents Double-sided documents to 128 g/m Plain paper: 50 g/m (13-1/4 lbs. to 29-1/4 lbs.) to 210 g/m to 110 g/m CF2002/CF3102 to 110 g/m...

  • Page 90: Mixed Originals Paper Sizes

    Document sizes A3 L A4 C B4 L B5 C A4 L A5 C B5 L A5 L : Possible —: Not possible CF2002/CF3102 A3 L A4 C B4 L B5 C A4 L — — — — — —...

  • Page 91: Document Precautions (Multi-Sheet Feeding)

    2 kg on the original glass. In addition, if a book is placed on the original glass, do not press it down extremely hard, otherwise the original glass may be damaged. (The original glass can withstand a weight of 2 kg.) Original Documents CF2002/CF3102...

  • Page 92: Feeding The Document

    Slide the adjustable document guides to fit the size of the document. Be sure to adjust the document guides to the size of the document, otherwise the documents may not be fed in straight. Touch [Orig Copy]. The Original Copy screen appears. CF2002/CF3102...
  • Page 93 If documents printed on thick paper are loaded, touch [Thick Original]. Select the desired copy settings, and then press the [Start] key. The documents are fed in, starting with the topmost document. After the documents are scanned, they are fed out into the document output tray. Original Documents CF2002/CF3102...
  • Page 94 Do not press on the lever at the rear of the copier. § When closing the document feed tray, do not press on the lever at the rear of the copier, otherwise the document feed tray may close quickly and pinch your hand. CF2002/CF3102 Lever...

  • Page 95: To Feed Documents Of Mixed Sizes

    Load the document so that all pages are aligned along the document guide toward the rear of the copier. Be sure to adjust the document guides to the size of the document, otherwise the documents may not be fed in straight. Original Documents CF2002/CF3102...
  • Page 96 Original Documents In the Basic screen, touch [Mixed Orig Detection]. Select the desired copy settings, and then press the [Start] key. The topmost page of the document is fed in and scanning begins. CF2002/CF3102...

  • Page 97: Manual Feeding

    Position the document face down onto the original glass with the top of the document toward either the rear or the left side of the copier. Align the document with the document scales. 5-10 Original Documents When loaded crosswise: When loaded lengthwise: CF2002/CF3102...
  • Page 98 Although the light that shines through the original glass is bright, it is not a laser beam and, therefore, is not as dangerous. CF2002/CF3102 mark 5-11...
  • Page 99 Touch [Orig  Copy]. The Original  Copy screen appears. Touch [Original Direction]. The Original Direction screen appears. Select the setting appropriate for your document, and then touch [Enter]. 5-12 Original Documents CF2002/CF3102...
  • Page 100 Press the [Start] key. The copy job is queued for printing. Lift open the original cover, or the duplexing document feeder if it is installed, and then remove the document. Close the original cover, or the duplexing document feeder if it is installed. CF2002/CF3102 5-13...
  • Page 101 Original Documents 5-14 CF2002/CF3102...

  • Page 102: Basic Operations

    [Copy] key. Press the [Panel Reset] key. In order to prevent paper misfeeds, all copy modes and functions should be reset. Position the document(s) to be copied. For details, refer to “Feeding the Document” on page 5-5. CF2002/CF3102...
  • Page 103 User manual on the CD-ROM. Touch [Orig Copy]. Make sure that the single-sided original and the single-sided copy settings are selected. For details, refer to p. 3-4 and the advanced version of the User manual on the CD-ROM. Basic Operations CF2002/CF3102...
  • Page 104 If other jobs are being printed, the job will be queued (multi-job feature). Touch [Job Log]. The printing status of the programmed job and the job’s settings can be viewed. For details, refer to the advanced version of the User manual on the CD-ROM. CF2002/CF3102...
  • Page 105 To quit copying, press the [Stop] key. Basic Operations CF2002/CF3102...

  • Page 106: Practical Copy Examples

    Then, adjust the document guides to fit the size of the document. Touch [Paper]. Make sure that paper of the same size as the document is loaded into a paper drawer. CF2002/CF3102...
  • Page 107 Make sure that the number of copies is set to “1”. Press the [Start] key. The copy job appears in the job display. Copying is performed in the order that the job was programmed. Basic Operations CF2002/CF3102...

  • Page 108: To Make An Enlarged Copy Of The Document

    Then, adjust the document guides to fit the size of the document. Touch [Zoom]. Touch [A4 A3]. Touch [Paper]. Make sure that A3-size paper is loaded into a paper drawer. CF2002/CF3102...
  • Page 109 Make sure that the number of copies is set to “1”. Press the [Start] key. The copy job appears in the job display. Copying is performed in the order that the job was programmed. Basic Operations CF2002/CF3102...

  • Page 110: To Make A Reduced Copy Of The Document

    Then, adjust the document guides to fit the size of the document. Touch [Zoom]. Touch [A3 A4]. Touch [Paper]. Make sure that A4-size paper is loaded into a paper drawer. CF2002/CF3102...
  • Page 111 Make sure that the number of copies is set to “1”. Press the [Start] key. The copy job appears in the job display. Copying is performed in the order that the job was programmed. 6-10 Basic Operations CF2002/CF3102...

  • Page 112: To Reduce Paper Use

    Then, adjust the document guides to fit the size of the document. Touch [Orig Copy], and then touch [4in1/Booklet]. Touch [1-4in1], and then touch [Enter]. Touch [Paper]. Make sure that A4-size paper is loaded into a paper drawer. CF2002/CF3102 6-11...
  • Page 113 Make sure that the number of copies is set to “1”. Press the [Start] key. The copy job appears in the job display. Copying is performed in the order that the job was programmed. 6-12 Basic Operations CF2002/CF3102...

  • Page 114: To Make Copies From A Book Or Magazine

    In addition, align the center of the book with the book mark on the document scale. Touch [Orig Copy], and then touch [Book]. Make sure that [Separation] is selected, and then touch [Enter]. Touch [Paper]. Select the drawer loaded with A4 C paper. CF2002/CF3102 6-13...
  • Page 115 Make sure that the number of copies is set to “1”. Press the [Start] key. The copy job appears in the job display. Copying is performed in the order that the job was programmed. 6-14 Basic Operations CF2002/CF3102...

  • Page 116: To Copy A Postcard

    When positioning the document, position it so that the top is toward the rear of the copier. Touch [Orig Touch [Original Direction]. Touch the setting for a document with the top pointing to the right. Touch [Paper]. CF2002/CF3102 Copy]. 6-15...
  • Page 117 (The side where the address is written should face up.) Adjust the paper guides to the size of the postcard. Lightly slide the postcard into the feed slot as much as possible. The postcard is fed in and copying begins. 6-16 Basic Operations CF2002/CF3102...

  • Page 118: Stopping Printing

    To delete a stopped print job, select the job that you wish to cancel, and then touch [Delete]. After touching [Delete], the message “Job has been done improperly. Check the record.” appears. The job being printed is deleted. Touch [Enter]. CF2002/CF3102 6-17...
  • Page 119 Basic Operations 6-18 CF2002/CF3102...

  • Page 120: Replacing Parts And Supplies

    If toner gets in your eyes, immediately flush them with water, and then seek professional medical attention. CAUTION Used toner cartridges § In order to prevent the used toner cartridge from dirtying anything, keep it in the box. § Dispose of the used toner cartridge according to your local regulations. CF2002/CF3102...
  • Page 121 WARNING Handling toner and the toner cartridge § Do not throw toner or the toner cartridge into a fire. Toner expelled from the fire may cause burns. Replacing Parts and Supplies CF2002/CF3102...

  • Page 122: To Replace The Toner Cartridge

    Make sure that the color of the toner cartridge is the same color as the lever. Do not install the toner cartridge of a color different than the one that was removed, otherwise the machine may be damaged. Remove the desiccant. CF2002/CF3102 Desiccant...
  • Page 123 Position the toner cartridge as shown, and then insert it into its compartment. Turn the lever clockwise. Make sure that the lever is fully turned, as shown, otherwise the front door cannot be closed. Replacing Parts and Supplies Protective CF2002/CF3102...
  • Page 124 Repeat this step three times. Securely insert each charger- cleaning tool, and then close the front door. If the door cannot be closed securely, the lever may not be in its correct position. Make sure that the lever is fully turned. CF2002/CF3102...

  • Page 125: Replacing The Staple Cartridge

    To replace the staple cartridge for FN-116 Slide the finisher away from the copier. Turn the dial to the left in order to position the stapler at the center. Pull the staple holder out toward you. Replacing Parts and Supplies Stapler CF2002/CF3102...
  • Page 126 Replacing Parts and Supplies Remove the empty staple cartridge. Insert the new staple cartridge into the staple holder, and then carefully pull out the stopper. Insert the refilled staple holder until it locks into place. Slide the finisher back against the copier. CF2002/CF3102...

  • Page 127: To Replace The Staple Cartridge For Fn-8

    Slowly pull out the stapler unit as far as possible. Turn dial clockwise until the staple cartridge moves to a position from where it can be removed. If the dial is turned too far, turn it counterclockwise to adjust it. Replacing Parts and Supplies CF2002/CF3102...
  • Page 128 The staple case is released. Pull up the staple case. Remove the paper holder from the staple case. Refill the staple case with staples. Fully insert the staple case as far as possible. CF2002/CF3102...
  • Page 129 Fully insert the staple cartridge so that it locks into place. Check that the staple cartridge is firmly installed. Carefully move the stapler unit back into its original position. Close the front door. 7-10 Replacing Parts and Supplies CF2002/CF3102...

  • Page 130: Empty The Hole Punch Waste Container

    Empty the hole-punch waste container, and then re-install it according to the following procedure. Slide the finisher away from the copier. Pull out the hole-punch waste container. Empty the container. Insert the hole-punch waste container into its original position. Slide the finisher back against the copier. CF2002/CF3102 7-11...
  • Page 131 Replacing Parts and Supplies 7-12 CF2002/CF3102...

  • Page 132: Troubleshooting

    A paper misfeed in the large capacity cabinet (p. 8-4) A paper misfeed in finisher FN-116 (option tray) (p. 8-11) A paper misfeed in the duplex unit (p. 8-3) A paper misfeed in a paper drawer (p. 8-3) A paper misfeed in finisher FN-8 (p. 8-14) CF2002/CF3102...

  • Page 133: To Clear A Paper Misfeed In The Manual Bypass Tray

    Be careful not to touch the surface of the image transfer belt or the image transfer roller. Pull up the lock release lever to open the right-side door. Carefully pull out the paper. Close the right-side door. Troubleshooting Image transfer belt Image transfer roller CF2002/CF3102...

  • Page 134: To Clear A Paper Misfeed In The Duplex Unit

    Close the duplex unit door. To clear a paper misfeed in a paper drawer Open the right-side door of the paper drawer indicated by the “O”. Turn the green wheels to feed the paper so that it can be easily removed. CF2002/CF3102...

  • Page 135: To Clear A Paper Misfeed In The Large Capacity Cabinet

    Carefully pull out the paper. Close the right-side door of the large capacity cabinet. Pull out the paper drawer of the large capacity cabinet, and then remove any misfed paper. Close the paper drawer of the large capacity cabinet. Troubleshooting CF2002/CF3102...

  • Page 136: To Clear A Paper Misfeed In The Right-Side Door

    Load the paper in the drawer again, and then close the drawer. Be careful not to touch the surface of the paper take-up roller with your hands. Pull up the lock release lever to open the right-side door. CF2002/CF3102 Image transfer belt Image transfer roller...
  • Page 137 The paper that was removed tore and remains n the fusing unit. Pull out any paper caught in the fusing unit. Open the right-side door, and then make sure that there is no paper in the fusing unit. Troubleshooting CF2002/CF3102...

  • Page 138: To Clear A Paper Misfeed In The Upper Right-Side Door

    Be sure to support the door while carefully opening it, otherwise it may be damaged. While moving the green lever on the inside of the upper right-side door in the direction of the arrow, carefully pull out the paper. CF2002/CF3102...
  • Page 139 The paper that was removed tore and remains n the fusing unit. Grasp the tab on the left end of the fusing unit cover, and then return the cover to its original position. Close the upper right-side door. Close the right-side door. Troubleshooting CF2002/CF3102...

  • Page 140: To Clear A Paper Misfeed In The Duplexing Document Feeder

    Carefully pull out any documents. Open the guide. Turn the dial to feed out any documents. Carefully pull out the documents. Carefully open the duplexing feed guide as far as possible. Check that the guide remains securely open. CF2002/CF3102 Guide...
  • Page 141 Carefully pull out any documents. Close the duplexing feed guide. Open the duplexing document feeder, and then carefully pull out any documents. Remove any documents on the original glass, and then close the duplexing document feeder. 8-10 Troubleshooting CF2002/CF3102...

  • Page 142: To Clear A Paper Misfeed In Finisher Fn-8

    CAUTION Metallic parts on the inside of upper cover FN1 are very hot. § Touching anything other than the paper within the area around the fusing unit may result in burns. Slide the finisher away from the copier. CF2002/CF3102 8-11...
  • Page 143 Open the horizontal transport unit cover, and then remove any paper. Close the horizontal transport unit cover. Open front door FN4. Turn knobs FN5 clockwise at the same time. While holding the misfeed-clearing guide FN7 open, pull out any paper. 8-12 Troubleshooting CF2002/CF3102...
  • Page 144 FN2 open, pull out any paper. While holding misfeed-clearing guide FN3 open, pull out any paper. Close upper cover FN1. If the Option tray is not installed, skip to step 16. If the Option tray is installed: Open the Option tray. CF2002/CF3102 8-13...

  • Page 145: To Clear A Paper Misfeed In Finisher Fn-8

    To clear a paper misfeed in finisher FN-8 Slide the finisher away from the copier. Open the cover of the horizontal transport unit. Remove any paper, and then close the cover of the horizontal transport unit. 8-14 Troubleshooting CF2002/CF3102...
  • Page 146 Open the upper door of the finisher, and then pull out any paper in the feed section. Close the upper door. Pull out any paper fed into the output tray. CF2002/CF3102 8-15...
  • Page 147 Feed the paper into the lower paper output tray, and then pull it out. Close the front door of the finisher. Be careful that your fingers are not pinched when the front door is closed. Slide the finisher back against the copier. 8-16 Troubleshooting CF2002/CF3102...

  • Page 148: Clearing A Staple Misfeed

    Turn the dial to the left in order to position the stapler at the center. Pull the staple holder out toward you. Push the staple holder guide up, and then pull out one sheet of staples. Move the guide back to its original position. CF2002/CF3102 Stapler 8-17...

  • Page 149: To Clear Jammed Staples In Fn-8

    Do not pull out the paper in any other way than described below. Slide the finisher away from the copier. Open the cover of the horizontal transport unit. Remove any paper, and then close the cover of the horizontal transport unit. 8-18 Troubleshooting CF2002/CF3102...
  • Page 150 If the paper is pulled out with too much force without performing these steps, the finisher may be damaged. Pull out any paper fed into the output tray. CF2002/CF3102 8-19...
  • Page 151 The staple cartridge moves to a position from where it can be removed. If the dial is turned too far, turn it counterclockwise to adjust it so the cartridge removal indicators are aligned. 8-20 Troubleshooting CF2002/CF3102...
  • Page 152 Be sure to remove two staples, otherwise stapling cannot continue correctly. Return the shutter of the staple cartridge to its original position. Insert the staple cartridge, making sure the tabs on the cartridge slide along the rails in the compartment. CF2002/CF3102 8-21...
  • Page 153 Fully insert the staple cartridge so that it locks into place. Check that the staple cartridge is firmly installed. Carefully move the stapler unit back into its original position. Close the front door. Slide the finisher back against the copier. 8-22 Troubleshooting CF2002/CF3102...

  • Page 154: Troubleshooting

    The printed output is too dark. The printed output is blurry. There are dark specks or spots throughout the printout. White or black lines on the printout. CF2002/CF3102 Possible Cause Remedy The copy density is set too Select a darker setting for the light.
  • Page 155 The document guides are Slide the document guides not positioned along the against the edges of the edges of the paper. paper. Curled paper was loaded Flatten the paper before into the paper drawer. loading it. Troubleshooting CF2002/CF3102...

  • Page 156: When The Copier Is Not Operating Correctly

    Even though the [Start] key is pressed, no copies are made Keys on the control panel do not respond. The copier cannot be turned CF2002/CF3102 Possible Cause Remedy If only the indicator on the Press any key to cancel [Start] key is lit, the copier is Energy Saver mode.

  • Page 157: Touch Panel Messages

    The indicated drawer has ran Load paper into the indicated out of paper. drawer. (See “Loading Paper” on page 4-1. The toner for the indicated Replace the toner cartridge color is about to run out. according to your maintenance agreement (p. 7-1). Troubleshooting CF2002/CF3102...
  • Page 158 (Inspection Mark in the lower left side of the basic screen) XXXX needs to be replaced soon. Please have the XXXX changed soon. CF2002/CF3102 Cause Remedy The staples have run out. Replace the staple cartridge. (p. 7-6) After clearing a paper...
  • Page 159 Troubleshooting 8-28 CF2002/CF3102...

  • Page 160: Appendix

    Appendix Appendix Specifications Copier CF2002/CF3102 Specification Type Platen Photo conductor Copying system Developing system Fusing system Resolution Document Paper types Paper sizes Paper capacity Warm-up time Lost image CF2002/CF3102 Desktop Stationary Dry-type electrophotographic method MTHG developing method Belt-fixing Scanning: 600 dpi, ×...
  • Page 161 792 mm (depth) (with the copier stand installed) Optional (M128-2) Scanner: 19.5 kg Printer: 85 kg (with all four imaging units installed) Full color: Less than 15 seconds Black: Less than 12 seconds (for A4 C paper loaded into the 1st drawer) Appendix ×...

  • Page 162: Duplex Unit Ad-14

    Document paper size Capacity of document feeder Power requirements Power consumption Dimensions Weight CF2002/CF3102 Plain paper (64 to 90 g/m A3 Wide L, A3 L, B4 L, A4 L/C, B5 L/C Supplied by copier Less than 17 W × 139 mm (width) 440 mm (depth) About 3.1 kg...
  • Page 163 — — — — — — — Appendix A4 L A5 C B5 L A5 L — — — — — — — — — — — — — — — — — — — — — — — CF2002/CF3102...

  • Page 164: Large Capacity Cabinet Pf-121

    Paper type Paper size Paper capacity Power requirements Power consumption Dimensions Weight CF2002/CF3102 Plain paper (64 to 90 g/m A3 L, B4 L, A4 L/C, B5 L/C 500 sheets (80 g/m Supplied by copier Less than 15 W × 535 mm (width) 568 mm (depth) About 8.5 kg...

  • Page 165: Finisher Fn-8

    Less than 65 W × 601 mm (width) 603 mm (depth) About 41.6 kg (including the horizontal transport unit) 1 staple cartridge (5,000 staples for 50 sheets) Appendix ), thick ), postcards, ): Maximum 20 × 933 mm (height) CF2002/CF3102...

  • Page 166: Finisher Fn-116

    Paper capacity “Staple” setting Power requirements Power consumption Dimensions Weight Accessories CF2002/CF3102 Non-sort tray, Elevated tray • When copying: “Non-sort” setting • When printing: “Non-sort”, “Sort”, “Group” and “Staple” settings • Non-sort tray: “Non-sort” setting: Plain paper (64 to 90 g/m...

  • Page 167: Option Tray

    A4 L/C, A3 L A4 C: 100 sheets, Except A4 C: 50 sheets × 341 mm (width) 527 mm (depth) About 1.75 kg Appendix ), Thick ), overhead × 149 mm (height) CF2002/CF3102...

  • Page 168: Paper Size And Zoom Ratio Tables

    Foolscap Foolscap Foolscap × 8-1/4 in. 11-3/4 in. Letter Government Letter Quarto Statement × 4 in. 6 in. CF2002/CF3102 Metric Size × 311 mm 457 mm × 297 mm 420 mm × 210 mm 297 mm × 148 mm 210 mm ×...

  • Page 169: Zoom Ratios

    × 1.414 × 2.000 × 1.733 × 1.224 × 2.000 × 1.414 × 1.733 × 1.224 × 0.816 × 0.577 × 0.707 × 0.500 × 1.154 × 0.816 × 0.577 × 0.707 × 1.640 × 1.154 × 1.414 CF2002/CF3102 Appendix...
  • Page 170 Appendix Metric Sizes Document Paper Size × 128 mm 182 mm × 5 in. 7-1/4 in. CF2002/CF3102 Desired Paper Size Zoom Ratio × 0.816 × 1.640 × 1.154 × 2.000 × 1.414 9-11...
  • Page 171 0.647 × × 11 in. 17 in. 1.294 × × 11 in. 14 in. 1.272 × × 11 in. 17 in. 2.000 × × 11 in. 14 in. 1.647 × Legal 1.545 × Foolscap 1.529 × Letter 1.294 CF2002/CF3102 Appendix...

  • Page 172: Consumables

    Do not throw away the used toner cartridges. Instead, keep them in their boxes to be collected by your service representative. Staple Cartridges FN-116 Staples for staple binding. 3,000 staples are provided in the staple cartridge. FN-8 Staples for staple binding. 5,000 staples are provided in the staple cartridge. CF2002/CF3102 9-13...

  • Page 173: Index

    ...3-31 touch panel contrast adjusting dial ... 3-32 Utility key ... 3-31 Control panel release lever ... 3-32 Copier ... 3-15 Copier stand ... 3-17 Copy desk ... 3-15 Copy table ... 3-16 9-14 Appendix 6-13 3-31 3-33 CF2002/CF3102...
  • Page 174 Filter ...3-23 Finisher (FN-116) ...3-15 Finisher (FN-8) ...3-16 Finishing ...3-12 hole-punching ...3-13 stapling ...3-12 Front door ...3-19 Fusing unit ...3-23 Hard disk ...3-17 Image transfer belt unit ...3-23 Image transfer roller unit ...3-23 Imaging unit ...3-23 Installation site ...2-7 CF2002/CF3102 9-15...
  • Page 175 Ozone filter ... 3-23 Paper ... 3-9 Paper capacity ... 4-3 Paper feed unit ... 3-16 Paper feeding ... 1-3 Paper misfeed clearing ... 8-1 Duplex unit ... 8-3 Duplexing document feeder ... 8-9 Finisher FN-116 ... 8-11 9-16 Appendix 5-10 6-15 CF2002/CF3102...
  • Page 176 Scanner ...3-15 Single-sided copies ...3-4 single-sided 2in1 copies ...3-5 single-sided 4in1 copies ...3-5 Single-sided originals ...3-4 Space requirements ...2-8 Specialty paper ...4-20 Specifications ...9-1 Staple cartridge replacement FN-116 ...7-6 FN-8 ...7-8 Staple jam clearing FN-116 ...8-17 FN-8 ...8-18 CF2002/CF3102 9-17...
  • Page 177 Turning the copier On and Off ... 3-1 Upper right-side door ... 3-22 Waste-toner bottle ... 3-23 Zoom ratios ... 9-10 Zoom settings ... 3-7 auto size ... 3-7 enlargement ...3-7 full size ...3-7 minimal ... 3-8 reduction ...3-7 zooming ... 3-8 9-18 Appendix 9-13 CF2002/CF3102...

This manual is also suitable for:

Cf2002

Table of Contents