Selecting Copy Size; To Select Copy Size Automatically (Aps) - Minolta CF5001 User Manual

Selecting Copy Size

To select an appropriate copy size for getting your desired copy result, use APS
(Automatic Paper Selection), or select copy size manually on the touch screen, as
required.

To Select Copy Size Automatically (APS)

APS detects the size of originals placed on the RADF or platen glass and automatically
selects and feeds copy paper of the same size, or selects an appropriate size according to
the magnification ratio selected.
1.
Touch to highlight APS under the COPY SIZE on the Basic Screen.
2.
Select additional copy conditions, as desired.
3.
Enter the desired print quantity from the control panel keypad.
4.
Position original(s).
5.
Press [START].
Scanned image will be printed on the copy size automatically selected.
3-14
APS is not available when using non-standard size or wide paper.
See p. 3-10 for details on setting print quantity.
• See p. 12-9 to p. 12-11 for the original sizes detectable from the RADF or on
the platen glass.
• Detectable original sizes can be changed from inch sizes to AB sizes, only A
sizes, or inch sizes and AB sizes mixed. See p. 14-37 to p. 14-42.
• See p. 3-4 to p. 3-9 for details on positioning originals.
• Key Operator can deactivate APS when the original is set in the RADF or on
the platen glass. See p. 14-37 to p. 14-42.