Setting Job During Warm-Up; Copy Size; Bypass Tray; Multi-Sheet - Minolta CF5001 User Manual

Setting Job During Warm-up

While the copier is warming up after power is turned on, select copy conditions and start
scanning so that the copier may start printing immediately when the copier engine is
ready.
1.
Turn on the power switch of the machine.
A few seconds after the Wake-up Screen appears in the LCD touch screen, seven types
of Warm-up Screens display in succession.
See p. 2-16 to p. 2-17 for details on turning on the power switch.
2.
Touch the LCD panel to change the Warm-up Screen to the Basic
Screen.
Check that the message "Ready to copy reserve" is displayed on the Basic Screen.
3.
Set the desired copying conditions, and enter the print quantity.
See p. 3-10 for details on setting print quantity.
4.
Position original(s) FACE UP in the RADF or FACE DOWN on the platen
glass.
See p. 3-4 to p. 3-9 for details on positioning originals.
3
Copying
Operations
Selecting
Color Mode
Positioning
Originals
Setting Print
Quantity
Set Job During
Warmup
Stop
Scan/Print

Copy Size

Multi-Sheet

Bypass Tray

Lens Mode
1-2, 2-2
2-1
Store Mode
Reserve
Job Status
Screen
Output without
Finisher
FS-115/215
Output Modes
Binding
Mode
3-11