Minolta CF5001 User Manual page 156

Troubleshooting Tips (continued)
"PLEASE CHECK ORIGINAL"
This message displays when the copier detects a non-standard paper size on the platen
glass.
Select copy size and press [START]. 1.000 magnification will be selected automatically.
If this message continues to display after selecting copy size, select 1.000 magnification,
even if it is already indicated, then press [START]. If desired, ask your service
representative to enable the machine to default to 1.000 magnification in this situation.
SHEET INSERTION RESULT IS NOT AS EXPECTED
Blank insertion: Be sure manuscript originals do not already include blank sheets in the
locations designated for sheet insertion.
Copy insertion: To ensure that chapter sheets in 1-2 mode always appear on the right
hand side in the finished set, insertion sheets must be designated on the page setting
screen with odd numbers, not even. If required, make an even numbered original page odd
by inserting a blank sheet in front of that page, so that the blank sheet is even and the
insertion sheet is odd.
FINISHER STAPLE RESULT IS NOT AS EXPECTED
The 2 staple position functions only on copy paper that is loaded vertically (portrait style).
COPIES SKEW IN THE STAPLED SETS
Check to see if copy paper is excessively curled in the tray.
Reload the copy paper upside down.
USING PUNCH, COPIES CANNOT BE PUNCHED
Check to see if the message "Trash basket of Punching kit is full" is displayed.
Empty the trash basket.
COPIES CANNOT BE STAPLED OR PUNCHED IN POSITION
Check to make sure the side guide plates are securely aligned to the copy paper in the
paper tray to be used.
PAPER MISFEED OCCURS FREQUENTLY INSIDE FINISHER
Check to see if copy paper is excessively curled in the tray. Reload the copy paper upside
down.
USING TRIMMER, COPIES CANNOT BE TRIMMED
Check to see if the message "Trash basket of Trimmer is full" is displayed.
Empty the trash basket.
5-14