Minolta CF5001 User Manual page 114

Output Mode for Machine without Finisher (continued)
Specification for Output Modes without Finisher
❒ Incompatible with Group mode: Proof Copy, Sheet/Cover Insertion, Chapter,
Combination, Booklet, Image Insert, Program Job, Repeat, AUTO Layout, Non-Image
Area Erase, Stamp (Numbering)
❒ Incompatible with Rotation Group mode: Proof Copy, Mixed Original, Z-Folded
Original, Non STD Size (WHOLE AREA), Sheet/Cover Insertion, Chapter,
Combination, Booklet, Image Insert, Book Copy, Program Job, Repeat, AUTO Layout,
Non-Image Area Erase, Stamp (Numbering), Overlay
❒ Incompatible with Rotation Sort mode: Mixed Original, Sheet/Cover Insertion, Booklet,
Repeat, AUTO Layout, Non-Image Area Erase
1.
Load copy paper.
When using Rotation sort or Rotation group mode, load the same paper size into two
trays in different orientation.
2.
Select the desired output mode.
To select Face down non-sort mode:
Confirm that OUTPUT APPLI. is not highlighted on the Basic Screen.
To select Group, Rotation group, Rotation sort or Face up mode:
Touch OUTPUT APPLI. on the Basic Screen to display the Output Mode popup menu,
then touch the desired mode key to highlight it.
To use Face up mode in combination, simply touch FACE UP to highlight it.
3-42
• Do not release the Rotation function.
• When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].
Face down non-sort mode is initially selected. Key Operator can change the
initial output mode. See p. 14-10.