Minolta CF5001 User Manual page 32

CAUTION: Inside the Booklet Mode Outlet
Inside the Booklet mode outlet is the roller drive unit. DO NOT put your hand into it, when
removing the folded or stapled & folded sheet; otherwise you may be injured.
CAUTION: Finisher Paper Exit Outlet
To avoid injury when stapling large size copies, DO NOT put your hand into the open
Paper Exit Outlet.
CAUTION: Fixing Unit
The internal fixing unit is very hot. To avoid getting burned, DO NOT TOUCH. Be careful
when withdrawing the fixing unit.
WARNING: Drum Unit
The internal drum unit generates a high voltage.
To avoid an electrical shock, DO NOT TOUCH.
CAUTION: LCT Bottom Plate
To avoid any unexpected injury, DO NOT put your hand into the holes (3 places) on the
bottom plate of the LCT.
CAUTION: Disposal of Copier
Do not dispose of this copier yourself. Contact your service representative, who can
arrange for its safe disposal.
If you change the place of installation, please contact your service representative.
CAUTION: Paper Capacity for the Exit Tray
The exit tray capacity is max. 120 sheets (28 lb paper). If a copy run of more than 120 is
required, be sure to remove the copies from the exit tray before the maximum capacity is
reached. Failure to do so will cause the copier to jam.
CAUTION: FN-120/FN-9 Finisher Paper Capacity
The FN-120 Finisher is equipped with two exit trays, and FN-9 Finisher is equipped with
three exit trays.
Select an exit tray and output mode on the Output Mode popup menu.
To prevent paper misfeed, do not exceed the paper capacity of the Finisher.
When the total number of copies in the copy run exceeds the capacity stated in Section
12, be sure to unload the exit tray while the copier is still copying. Failure to do so will
cause the copier to jam.
1-12
Requirements for Safe Use (continued)