Minolta CF5001 User Manual page 96

Selecting Magnification Ratio (Lens Mode) (continued)
To specify a zoom ratio:
Touch the Vertical/Horizontal zoom key in the ZOOM area to highlight it.
Use the keypad on the popup menu to enter the desired magnification ratio, then touch
OK.
The selected ratio will be displayed on the Basic Screen.
3.
Select additional copy conditions, as desired.
4.
Enter the desired print quantity from the control panel keypad.
5.
Position original(s).
6.
Press [START].
3-24
• The magnification ratio should be a 4-digit number. Start with 0 if the the
magnification ratio is under 1.000.
If an incorrect ratio is entered, continue by entering the correct ratio.
• Use the upper arrow ( ) to enlarge, or the lower arrow ( ) to reduce the
ratio in 0.1 % (0.001) increments.
• To restore the previous setting, touch CANCEL.
See p. 3-10 for details on setting print quantity.
See p. 3-4 to p. 3-9 for details on positioning originals.