Minolta CF5001 User Manual page 79

Positioning originals in Z-Folded original mode
Z-Folded original mode detects the folded original size without using the size detection
sensor of the RADF.
• To use the Z-Folded original mode, see procedure on p. 9-8 to p. 9-9.
• See p. 12-11 for available sizes of folded originals.
1.
Arrange originals in order.
2.
Position original(s) FACE UP in the document feeder tray.
Place two-sided originals with page one FACE UP.
Up to 100 originals can be set at a time.
• Be sure not to use unsuitable RADF originals. See p. 12-9 for details.
• Do not set more than 100 originals or over the limit indicated on the paper
Before placing originals in the tray, be sure the document feeder is closed fully.
Once closed, do not open the document feeder, otherwise the selected copy
conditions may be altered automatically.
3.
Adjust paper guides.
guides; otherwise a paper misfeed will occur to cause damage to the
originals.
Positioning Originals (continued)
3
Copying
Operations
Selecting
Color Mode
Positioning
Originals
Setting Print
Quantity
Set Job During
Warmup
Stop
Scan/Print
Copy Size
Multi-Sheet
Bypass Tray
Lens Mode
1-2, 2-2
2-1
Store Mode
Reserve
Job Status
Screen
Output without
Finisher
FS-115/215
Output Modes
Binding
Mode
3-7