Making Double-Sided Copies (1 2, 2 2) (continued)
Using Platen Glass
Use the platen glass to scan originals unsuitable for the document feeder.
Specification for Double-Sided Copying Using Platen Glass
❒ Use the Platen store mode.
❒ See p. 12-9 for the information on unsuitable RADF originals.
❒ Incompatible Conditions: Face Up, Image Insert, Multi-page Enlargement, Storing
Image in Overlay Memory
1.
Check the original set direction.
The Original direction icon is located at the upper left corner of the Basic Screen.
To change the original set direction, touch SPECIAL ORIGINAL on the Basic Screen to
display the Special Original popup menu, then touch the desired original direction key to
highlight it.
Touch OK to return to the Basic Screen.
2.
Select the binding mode.
Touch OUTPUT APPLI. on the Basic Screen to display the Output Mode popup menu,
then touch the desired binding mode key to highlight it.
3-28