Minolta CF5001 User Manual page 93

Copying Using Special Paper (Multi-Sheet Bypass Tray) (continued)
Touch Input size to display the Input Size popup menu, touch the vertical or horizontal
size key to highlight it, then use the keypad on the popup menu to enter the vertical/
horizontal size, or use arrow keys to scroll to that number.
The entered number should fall within the range from the vertical/horizontal size of the
standard size corresponding to the selected wide size, to a maximum of 13" (330 mm)/
19.2" (487 mm).
When selecting Wide paper, be sure to specify the actual size of the wide
paper to be loaded. Wide paper size information is not initially input in this
machine.
6.
Touch OK.
The Basic Screen will be restored. The bypass tray key shows the specified size, paper
type and the number indicating paper weight, and is highlighted along with the TYPE/
SIZE key.
When the STD size (special) or Wide paper is selected, the size specified on
the popup menu will be indicated on the bypass tray key.
When Non STD size is selected, the SPECIAL indication will appear instead.
7.
Select additional copy conditions, as desired.
8.
Enter the desired print quantity from the control panel keypad.
See p. 3-10 for details on setting print quantity.
9.
Position original(s) FACE UP in the document feeder or FACE DOWN on
the platen glass.
• See p. 3-4 to p. 3-9 for details on positioning originals.
• See p. 9-4 to p. 9-5 for details on positioning non-standard size or tabbed
10.
Press [START].
paper originals.
3
Copying
Operations
Selecting
Color Mode
Positioning
Originals
Setting Print
Quantity
Set Job During
Warmup
Stop
Scan/Print
Copy Size
Multi-Sheet
Bypass Tray
Lens Mode
1-2, 2-2
2-1
Store Mode
Reserve
Job Status
Screen
Output without
Finisher
FS-115/215
Output Modes
Binding
Mode
3-21