Minolta CF5001 User Manual page 102

Making Double-Sided Copies (1 2, 2 2) (continued)
5.
Select additional copy conditions, as desired.
6.
Enter the desired print quantity from the control panel keypad.
7.
Press [START] to scan.
The front side image of the double-sided copy will be scanned into memory.
8.
Replace the original on the platen glass with the back side image
original, then press [START].
Repeat this step until all originals are scanned.
9.
After all originals are scanned, touch STORE to exit the Store mode.
STORE will no longer be highlighted.
10.
Press [START] to print.
All the data in memory will be output.
3-30
Some incompatible conditions may automatically release the selected copy
mode. In this case, arrange the settings so that they are compatible with the
selected copy mode.
See p. 3-10 for details on setting print quantity.
• Memory indicator on the upper right of the Basic Screen allows you to check
the remaining memory.
• To delete the scanned data without printing, press [STOP]. See p. 3-13 for
details.
Press [STOP] to suspend the printing job. See p. 3-13 for details.
When the finisher / trimmer unit / paper exit tray capacity is exceeded
due to the print quantity selected, remove the copied sets as they
exit; otherwise, mishandled paper will occur.