To Scan Originals Into Memory (Store Mode); Reserve; Job Status Screen - Minolta CF5001 User Manual

To Scan Originals into Memory (Store Mode)

Store mode allows you to scan all the originals first, then to start a continuous printing job.
Use RADF store mode to scan a large amount of originals.
Use Platen store mode for originals that cannot be fed through the document feeder due to
thickness, size or condition.
These two modes can be used in combination.
RADF tray capacity is 100; however, more than 100 originals can be scanned
into memory using RADF store mode.
Specification for Store Mode
❒ Incompatible with RADF store mode: Image Insert, Storing image in Overlay Memory
1.
Make copying selections, as desired.
When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].
2.
Touch STORE on the Basic Screen to highlight it.
3.
Enter the desired print quantity from the control panel keypad.
See p. 3-10 for details on setting print quantity.
4.
Position original(s).
Using platen glass:
Place original FACE DOWN. Start scanning from the first page.
When Book Copy, Non-Image Area Erase, Auto detection mode of Repeat, or
AUTO Layout is selected, keep the RADF open throughout the scanning
procedure.
3
Copying
Operations
Selecting
Color Mode
Positioning
Originals
Setting Print
Quantity
Set Job During
Warmup
Stop
Scan/Print
Copy Size
Multi-Sheet
Bypass Tray
Lens Mode
1-2, 2-2
2-1
Store Mode

Reserve

Job Status
Screen
Output without
Finisher
FS-115/215
Output Modes
Binding
Mode
3-33