Recalling - Minolta CF5001 User Manual

In Reserve mode, pressing [INTERRUPT] before the copier finishes scanning
the reserve job originals clears the settings selected for the reserve job.
For details of Reserve mode, see p. 3-35 to p. 3-37.
2.
Set copy conditions, as desired.
The initial settings in Interrupt mode are as follows.
Color Mode : Full Color
Copy Mode : 1 1
RADF : ON
AES : ON
Lens Mode : 1.000 (100%)
APS : ON
Print Quantity : 1
Finisher : Sub Tray
Remove any document from the platen glass or from the document feeder, if
present.
3.
Position original(s).
See p. 3-4 to p. 3-9 for details on positioning originals.
4.
Press [START] to start the interrupt copying.
When [CHECK] is pressed during Interrupt copying, the information displayed
reflects the initial copy job settings. Check mode will not display Interrupt copy
job information.
5.
When Interrupt copying is completed, press [INTERRUPT] again.
The [INTERRUPT] LED turns out and the INTERRUPT indicator on the Basic Screen
returns to the JOB indicators.
The settings of the initial job will be restored on the Basic Screen.
6.
Press [START] to resume copying.
When the finisher / trimmer unit / paper exit tray capacity is exceeded
due to the print quantity selected, remove the copied sets as they
exit; otherwise, mishandled paper will occur.
Interrupt Copying (continued)
4
Helpful
Functions
Proof Copy
Check Mode
Interrupt
Mode
Job Memory

Recalling

Previous Settings
Help Mode
4-9