Checking The Copy Paper Size And Selecting The Paper Source - Minolta EP1050 Manual

Checking the Copy Paper Size and Selecting the Paper
Source
Meter Count
Toner
Drum Dehumidify
Auto Size Sort
When the copier is not equipped with the Multi Bypass Table, it is necessary
to check that the desired paper size is loaded into the Drawer. If it is not
loaded, make a copy using a Manual Bypass Table or load the desired paper
size into the Drawer.
Manual Bypass Copying
Add Paper Indicator
When the copier is equipped with the Multi Bypass Table, the paper source
(paper size) can be selected, Drawer or Multi Bypass Table.
Selecting the Paper Source (Only when the Multi Bypass Table is used)
Each time the Paper Select Key is pressed, the Paper Source Indicators, Drawer
Indicator or Multi Bypass Indicator, light up alternately. Also, the Paper Size
Indicator corresponding to that of the Drawer lights up.
Paper
A4
Auto
Book
Lighter
p. 49
p. 72
Paper
1142O100CB
1142O100CB
2. Copying Procedure
50%~200%
141% A4
115% B4
100% Full Size
81% B4
Darker
70% A3
33
%
A3
A3
A4
A4
1142O154DB
1142O154DB
Paper
A4
1142O139DA
1142O139DA