Job Recall; Recalling A Stored Copy Job Program; Copy Job Recall - Minolta Di 200 Advanced Information

5
5.3

Job Recall

Recalling a Stored Copy Job Program

Recall a stored copy job program.
1 Press the [UTILITY] key on the
control panel.
The display will change.
2
Press [COPY JOB RECALL].
The display will change.
3 Touch the memory location key
where the copy job program was
stored.
The display will change.
4 Check the settings of the copy job
program.
? Did you select the wrong copy
job program?
§ Press [CANCEL]. The screen
with the memory locations will
be shown again.
§ Select the correct copy job
program from the screen.
5-16
Utility
Di200