Instructions For Loading Originals For Finishing Mode; Using The Automatic/Duplexing Document Feeder; Placing The Original On The Original Glass - Minolta EP2030 Operator's Manual

Making Copies

Instructions for Loading Originals for Finishing Mode

Note the correct direction of the originals if the copies are to be stapled
either in the Sort-and-Staple or Manual Staple mode.

Using the Automatic/Duplexing Document Feeder

Load the originals crosswise in the Document Feeder. Ensure also that
the stapling position is at the rear left corner as indicated by the arrow.
Correct
Stapling Position

Placing the Original on the Original Glass

Place the original with its stapling position at the upper right corner as
shown in the illustration.
Press the Manual Staple Key to staple copy sets or a copy stack.
EP2030
Originals loaded crosswise Copy
Stapling Position
3-33
3