3-4
2. Placing Originals
Placing Originals on the Original Glass
Different methods are used to place the original depending on its type. Use the appropriate procedure.
Sheet Originals
(Using plain paper or thick paper.)
Raise the Original Cover.
1
Place the original face down on the Original
2
Glass.
Align the rear left corner of the
3
with the marker on the Original Width Scale.
Gently lower the Original Cover.
4
Highly Transparent Originals
(Using transparencies and translucent paper for
the original.)
Place the original in the same way as the
1
sheet originals.
Place a blank sheet of paper of the same size
2
over the original.
1151o013
original
Gently lower the Original Cover.
3
NOTES
• The original sizes that can be detected in the
Auto Paper Select Mode are 11" 17", LegalL,
LetterL, LetterC. When making copies from
1151o014
originals other than the above, select the copy
paper size.
• When using wrinkled or curled originals, the
original size might not be detected correctly.
So, select the copy paper size and do not use
the Auto Paper Select Mode.
Copy Paper Size
1139o007
p. 3-12