Rep 17 Control Panel/Circuit Board/Key Pad/Display/Glass/Top Cover With Loudspeaker - Xerox FaxCentre 2121 Service Manual
Hide thumbs
Also See for FaxCentre 2121:
- User manual (146 pages) ,
- Specifications (2 pages) ,
- Quick reference manual (2 pages)
Table of Contents
Advertisement
Repairs and Adjustments
REP 17 Control Panel/Circuit Board/Key Pad/Display/Glass/Top
Cover with Loudspeaker
Parts list on PL 6
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer supply
while performing tasks that do not need electricity. Electricity can cause death or injury. Moving
parts can cause injury.
CAUTION
The active surface of the CIS is fragile and light-sensitive. Take care to protect it and to expose it
to light as little as possible during this operation.
Removal
1. Stand at the back of the machine.
2. Press the top cover release latch.
Use a flat screwdriver as a lever at the four locations shown in Figure 1 to unclip and remove the
top cover of the control panel, then close the chassis again.
Top cover fixing clips
Control panel
Figure 1
3. Stand in front of the machine.
FaxCentre 2121/2121L
11/06
4-33
Advertisement
Chapters
Table of Contents
