GP 9 Functions of the Service Provider
Initializing and Erasing the Memories
First set the installation parameter Configuration bit 8 to 1.
•
Reset to default configuration (factory configuration) of all parameters (user and installer(or
technical)):
This procedure will erase the network enablement option. If this is done on a network enabled
machine, a new network option will have to be purchased.
•
Erase directory:
•
Erase logs:
•
Erase printer counters:
•
Erase consumables counters using menu 85:
Note: To see the initialization message, switch the machine off, then on.
•
Re-initialize the flash memory data (complete erase): open the scanner cover, then:
•
Erase mailboxes (internal) only:
FaxCentre 2121/2121L
This procedure will erase options GDF, FSI and kit LAN.
CAUTION
#
0
MENU
#
1
MENU
2
#
MENU
3
#
MENU
CAUTION
4
#
MENU
5
#
MENU
6
#
MENU
11/06
General Procedures and Information
6-43