Xerox FaxCentre 2121 Service Manual page 177

For this function, bit 8 of configuration 1 of the installation parameters must first have been set to 1.
• Save the directory and the parameters on a smart card via the smart card reader:
• Save the directory via STN:
• Accept directory download via STN:
• Restore directory and parameters from a smart card via the smart card reader:
• Start feeder scanner calibration:
Note: Refer to GP 21 for more information regarding scanner calibration.
• Display main software version:
• Display modem type:
• Display boot software version:
• Enter serial number:
• Display LAN rate:
FaxCentre 2121/2121L
5
*
MENU
7
*
MENU
8
MENU *
9
MENU *
A
MENU *
V
MENU *
M
MENU *
B
MENU *
N
*
MENU
P
*
MENU
11/06
General Procedures and Information
6-45