Xerox FaxCentre 2121 Service Manual page 23

3. Clean the rolls of the document feeder and feed shafts, and also the two idler rolls located on
the mobile part of the scanner, with a lint-free cloth moistened with film remover.
Note: To clean them, rotate them in the same direction as during paper transport. The
recommended interval is between 2 to 6 months.
Retard Pad
To clean the retard pad, perform the following:
1. Set the on/off switch to "O" (off).
2. Open the control panel/scanner by pressing the cover release latch located on the left of the
machine.
The opening is limited to approx 60° by stops. Do not try to force the panel any further.
3. Wipe the elements of the retard pad with a lint-free cloth soaked with film remover.
Note: The recommended interval is between 2 to 6 months.
CIS Window
To clean the CIS Window, perform the following:
1. Set the on/off switch to "O" (off).
2. Open the control panel/scanner by pressing the cover release latch located on the left of the
machine.
The opening is limited to approx. 60° by stops: do not try to force the panel any further.
3. Wipe the scanner window with a lint-free cloth moistened with film remover, or with antistatic
paper tissues as used for cleaning optical glass.
Note: The recommended interval is to be defined depending on utilization. After cleaning, it is
advised to make a local copy to check the cleanliness of the window.
FaxCentre 2121/2121L
CAUTION
CAUTION
11/06
Service Call Procedures
1-5