Transmission With Auto Redial - Xerox FaxCentre 2121 User Manual

The document is stored and will be sent at the new time.

Transmission with auto redial

Monitor the dialling operation during a fax transmission. In this case, the maximum
transmission rate will be 14400 bps.
This function allows the user for example:
• to listen if the subscriber's fax is engaged and if so, choose the moment when the
line is clear to start the document transmission,
• to monitor the communication progress in case of uncertain numbers, etc.
To monitor the line manually:
Place the document in the fax feeder.
Press
.
If necessary, set the sound level with navigator
If not already done, enter the fax number (or refer to From the redial key on
page 6-3 to call back the last fax number).
When you hear the remote fax tone, the line is clear and you can start the transmission.
Press to start the document transmission.
If the machine is set to print a transmission report (refer to Main settings on page 4-2),
the reduced copy of the document first page will not be printed and it notifies you that
the communication is manual.
Rerouting
Reroute faxes received to a directory contact by setting and then activating the fax
reroute address.
Activate rerouting
Using the keys
Press OK to confirm.
Note:
If the function WITHOUT is selected, menus 3912 and 3913 will not be
included in the functions overview, when it is printed out.
M 3911 OK - FAX / FAX FORWARD. / REROUTING / ACTIVATION
or within the navigator select option 3911 WITH.
Operation
or keys.
6-5