Rep 23 Dis-Assembling The Scanner - Xerox FaxCentre 2121 Service Manual

REP 23 Dis-Assembling the Scanner

Parts List on PL 2
Switch off the electricity to the machine. Disconnect the power cord from the customer supply
while performing tasks that do not need electricity. Electricity can cause death or injury. Moving
parts can cause injury.
Removal
1. Remove the Control Panel/Scanner Chassis Assembly (REP 19).
2. Remove the screw beside the scanner release button as shown in Figure 1.
3. Remove the screw on the right side of the scanner beside the alignment pin as shown in Fig-
ure 2.
4. Release the catch on the left of the Control Panel/Scanner Chassis Assembly, Figure 3.
FaxCentre 2121/2121L
WARNING
Figure 1
Figure 2
11/06
Repairs and Adjustments
4-45