Xerox FaxCentre 2121 Service Manual page 68

Repairs and Adjustments
Replacement
1. Take out the fuser and packing materials.
2. Connect the fuser exit guide assembly to the new fuser.
3. Connect connector A.
Figure 3
4. Mount the fuser in the machine and secure it in position by tightening the two screws.
5. Connect connectors B and C.
Note: When installing the Fuser, route the harness as shown in Figure 3. Do not trap the harness
between the Fuser and Machine.
6. Reinstall the fuser protective cover.
4-14 11/06 FaxCentre 2121/2121L