Xerox FaxCentre 2121 Service Manual page 7

• A part marked with the symbol shown on the left and other parts such as the expo-
sure lamp and fuser roll can be very hot while the machine is energized. Touching
them may result in a burn.
• Wait until these parts have cooled down before replacing them or any surrounding
parts.
This product must be connected to a protective ground circuit.
• This product shall be operated from the type of electrical supply indicated on the
products data plate. If there is uncertainty if the electrical supply meets the
requirements, consult the local power company for advice
• This product is supplied with a plug that has a protective ground pin. This plug will
only fit into a grounded electrical outlet. This is a safety feature. To avoid risk of
electrical shock, the electrical outlet should be replaced if the plug can not be
inserted into it. Never use a grounded adaptor plug to connect the product to an
electrical outlet that lacks a ground connection.
Do not modify the product.
• Any unauthorized alteration, which may include the addition of new functions or
connection of external devices, may impact the product certification. Please con-
tact your authorized local dealer for more information.
Restore all parts and harnesses to their original positions.
• To promote safety and prevent product damage, make sure that wire harnesses
are returned to their original positions and properly secured in their clamps and
saddles in order to avoid hot parts, high-voltage parts, sharp edges, or being
crushed.
• To promote safety, make sure that all tubing and other insulating materials are
returned to their original positions. Make sure that floating components mounted
on the circuit boards are at their correct distance and position off the boards.
FaxCentre 2121/2121L
WARNING
11/06
Introduction
v