Xerox FaxCentre 2121 Service Manual page 152

General Procedures and Information
List of Configurations (SW)
Soft-switch 1: Ringing and automatic printing.
Bit
1
2
3
4
5
6
7
8
Note: When bit 8 of SOS 1 is set to 1, a protocol report can be printed by pressing the * key.
Also, an internal test pattern can be printed by pressing the # key.
Soft-switch 2: Scanner/Printer engine configuration
Bit
1
2
3
4
5
6
7
8
6-20
Table 1: Ringing and automatic printing
Default Value
1 Reserved
0 Reserved
0 SOS-DURPAUSE: Long/short pause while dialing Values: # 0
(Short 2sec.) or 1 (Long 6sec.)
0 Reserved
0 Reserved
1 SOS-IMPAUTO: Automatic log print Values: 0 (No) or 1 (Yes)
0 SOS-IMPT30: Automatic printing of T30 trace after comm error. Val-
ues: # 0 (No)1 (Yes)
0 SOS-IMPTRA: Trace printing/PC download enable Values: # 0
(No)1 (Yes)
Table 2: Scanner/Printer engine configuration
Default Value
0 Reserved
0 Reserved
0 Keyboard beep on/off Values: # 0 (Beep on)1 (no beep)
1 Reserved
0 Reserved
0 Reserved
0 SOS-COPLOC: Restriction on local copies Values: # 0 (No)1 (Yes)
0 SOS-TIMKONIKA: Timed memorizing of photocopier resolution/
contrast/settings Values: # 0 enabled1 disabled
Naming
Naming
11/06 FaxCentre 2121/2121L