General Procedures and Information
GP 14 Imaging Cartridge Section
Overview
•
This machine adopts the single-component FMT, or Fine Micro Toning, developing system.
•
The toner agitating screw conveys toner in the toner cartridge onto the toner supply roller.
•
The toner supply roller transports the toner to the sleeve roller. The resin sleeve of the sleeve
roller carries the toner onto the drum to form a toner image on the latent image formed on the
surface of the drum.
•
The illustration below shows the construction of the toner cartridge and the developing unit.
6-56
Figure 1
Figure 2
11/06
FaxCentre 2121/2121L