IQ 2 Deletions RAP
Switch off the electricity to the machine. Disconnect the power cord from the customer supply
while performing tasks that do not need electricity. Electricity can cause death or injury. Moving
parts can cause injury.
Description
•
White spots occur periodically on the print.
Checks and Causes
1. Determine the source of the problem. Make
a copy. Print an internal test pattern.
Note: To print an internal test pattern, set
SOS 1 Bit 8 to 1, then press the # key, refer to
GP 4.
2. Is paper damp?
3. Is the drum scratched?
4. Is there foreign matter in paper path?
5. Is BTR dirty or scratched?
FaxCentre 2121/2121L
WARNING
Table 2: Deletions
1. Load fresh paper.
2. Install a new Drum Cartridge (PL 13).
3. Remove foreign matter.
4. Install a new BTR (PL 12).
5. Install a new HVPS (PL 11).
6. Install a new Main PBA (PL 5).
11/06
Image Quality
Solutions
3-5