Push-Buttons, Leds And Display; Unit - Deif GC-1F Installation Instructions Manual

GC-1F
This chapter deals with the display including the push-button and LED functions.
Front dimensions H × W
Unit depth
Push-button functions
The push-buttons on the unit have the following functions:
I:
Start engine (local (not auto)) running mode.
Breaker ON.
O:
Stops the engine immediately.
If the unit is in AUTO mode,
the mode will change to MAN
and the engine will stop.
DEIF A/S

5. Push-buttons, LEDs and display

Unit

AUT:
AUTO running mode
selector.
ESC
AUT
Breaker OFF.
MAN:
Manual running mode
selector.
Installation Instructions and Reference Handbook
160 × 220 mm (6.30" × 8.66")
54 mm (2.13 ")
Reset horn relay.
TEST
▲:
Normal display: Scrolls
the display up once.
Programming:
Increases the set point
value.
:
Enters value or ack-
nowledges alarm.
▼:
Normal display: Scrolls
the display down once.
Programming:
Decreases the set
point value.
ESC:
Jumps from parameter
settings to display.
TEST:
Activates the selected
test in the entered
time.
Lamp test:
Activates all LEDs for
3 seconds.
Page 31 of 123