Push-Buttons, Leds And Display; Unit - Deif GC-1F Operator's Manual

GC-1F
Front dimensions H x W
Unit depth
Push-button functions
The push-buttons on the unit have the following functions:
I:
Start engine (local (not auto)) running mode.
Breaker ON.
O:
Stops the engine immediately.
If the unit is in AUTO mode,
the mode will change to MAN
and the engine will stop.
DEIF A/S

3. Push-buttons, LEDs and display

Unit

AUT:
AUTO running mode
selector.
ESC
AUT
Breaker OFF.
MAN:
Manual running mode
selector.
160 x 220 mm (6.30" x 8.66")
54 mm (2.13 ")
Reset horn relay.
TEST
Operator's Manual
▲:
Normal display: Scrolls
the display up once.
Programming:
Increases setpoint
value.
:
Enters value or ack-
nowledges alarm.
▼:
Normal display: Scrolls
the display down once.
Programming:
Decreases setpoint
value.
ESC:
Jumps from parameter
settings to display.
TEST:
Activates the selected
test in the entered
time.
Lamp test:
Activates all LEDs for
3 seconds.
Page 7 of 11